Oring size kral puncher breaker

For .22 cal ...

Can you call pyramid air? I called them and had replacement parts in a few days.



I can't tell you from memory. I can try to measure for you in a day or two.

If memory serves me correctly,the fill probe o'ring is a #9. I had to radius the edges on my fill port with some 400 them 600 grit wet/dry paper to reduce the chance of damage to the o'rings (be sure to add a little silicone grease to them). I have a pic of a little doo-dad that I use on my probes to keep crap off of them. Just a vacuum line plug.

As far as the barrel o'ring,the only place I've found the right size so far is at Pyramyd.

Hope this helps Ya!

Mike