PCP Airguns - O'RING list

Jump to latest Follow Reply
A

ALARM890

Member
Jul 12, 2019
20
0
KY, United States
How each of us who rebuild or reseal a gun put a complete list of orings for that special one,(model and caliber).

Be saved as a reference, or directory, used now or further for future generations.

Don't expect tuners or professional the one who does it as an income to participate.

You can find; EDGUN, VULCAN first generation,and TAIPAN MUTANT orings list at the old [ TALON AIRGUN ],and also

HW 100 at AIRGUNFORM.CO.UK

Hope there will be no comment, but more of the knowledge.

If there is contribution, Michael can elaborate to make a refine directory.


 
FX Crown O'Ring Database & Parts List / Dirte

8aa73c9101d4f41e73288bc6ecfcac19.jpg
2fe35a611d8a7cc8cdf8b39b652d80f8.jpg
00d1c44db7990a70d6762d5ac9c69c1a.jpg
b3b438a08a20f864853054fce6ded760.jpg
80bf059cf88c60625295200f92642d7d.jpg
FX has released their Crown parts list. Here is a list of the metric O'rings.
46b396daac9106e6e0f27d745b2ac61f.jpg
FX I
 
Upvote 0
O-Rings for Artemis P15 / Diana Skyhawk / JungleShooter


USA Sizes vs. Artemis Sizes
Cross Section X Inside Diameter vs. Outside Diameter X Cross Section
Part No. CS x ID (USA) vs. CS X OD (Artemis) 18 “suppressor o-ring” | mentioned in the OEM parts diagram, both without size data
n/a: 1.5mm x 4mm [two; for fill probe] 7mm x 1.5mm
33 1.5mm x 5mm 8mm x 1.5mm
38 1.5mm x 5mm 8mm x 1.5mm
30 1.5mm x 5.5mm 8.5mm x 1.5mm
48 1.5mm x 6mm 9mm x 1.5mm
23 1.5mm x 9mm 12mm x 1.5mm
Careful: The Skyhawk seems to have part no. 22 and no. 23 than in the P15 parts diagram!
53 2.0mm x 14mm 18mm x 2.0mm
34 2.0mm x 22.2mm 27mm x 2.4mm
I did not find this size at the O-Ring Store, but I found: 2.5mm x 22.0mm
 
Upvote 0
HW 100


Here's the full list of factory O-rings and the two recommended alternatives (bolded)

O-ring HW 100, 37.1 x 1.6 Cylinder clamp 2682C
O-ring HW 100, 15.6 x 2.5 Barrel clamp 2682B
O-ring HW 100, 32 x 2 Magazine 2603A*
O-ring HW 100, 13 x 2 Adaptor A 2704
O-ring HW 100, 2.57 x 1.78 Adaptor B 2703B

O-ring HW 100, 3 x 1.5 Valve stem 2655D
O-ring HW 100, 12 x 1.2 Breech block main (12 x 1) recommended 2658
O-ring HW 100, 5.5 x 1 Breech/probe seal .22 2659A*
O-ring HW 100, 4.5 x 1 Breech/probe seal .177 2659A*
O-ring HW 100, 4 x 1.5 Probe buffer 2618A*
O-ring HW 100, 2.57 x 1.78 Main valve inlet 2665D
O-ring HW 100, 7 x 1.5 Main valve outlet 2666
O-ring HW 100, 2 x 2 Main valve internal (2.57 x 1.78) recommended N/A
O-ring HW 100, 7 x 1.5 Regulator piston 2668
O-ring HW 100, 10 x 1.5 Tension adjuster (sometimes omitted) 2672
O-ring HW 100, 8 x 1.5 Barrel 2679

FX/V-Mach Probe, 5.28x1.78 PUR70

 
Upvote 0
Don't forget "X" and Double "X" rings.

They actually can seal better than o-rings in certain applications. I put an "X"-ring seal in place of the failing o-ring in my Sig Sauer ASP, Super Target. Seals well and since it's basically a square, there's no worry about it falling out of the breach groove.

Mcmaster Carr and Grainger are two good outlets for the various, _-rings. They have different materials also. Rubber that isn't sensitive to the oils on the ,marker "beside" silicone..!



Mike
 
Upvote 0
Taipan Mutant / Veteran per mughram

Simplification of the manometer for the front plug 9.25 x 1.78
Friction ring of rotation of the cap 13 x 2.5
Filling nozzle 2 pcs 4.47 x 1.78
Check valve 1 pc. 4.47 x 1.78
Sealing the front plug on the tank 1pc 23 x 3
Filtering of the filter 1 pc. 9.25 x 1.78
Filter removal 1 pc. 7 x 2
Piston seal 1pc 2.9 x 1.78 PU
Piston seal 1pc 6.07 x 1.78 PU
Seal of conical bush 1 piece 12,42 x 1,78
Sealing on the tank 2pcs 23 x 3
Sealing on the tank 1pc 23 x 3
Seal on the valve body 1pc 13.5 x 2
Seal the trumpets on the barrel 1pc 11 x 2

Seals of breech on calibers:
4.5mm -4.47 x 1.78
5.5mm – 5.28 x 1.78
6.35mm – 6.07 x 1.78

All not mentioned rings NBR-70
 
Upvote 0
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu