Opinion about a Maurader modification

Forums PCP Airguns Opinion about a Maurader modification

  • Views : 526
  • Link

    cca50
    Participant
    Member

    It is a Gen 2 .177 I have just purchased, should be here the end of the week. Has a regulator already and shooting 45 shots on one fill, a little over 900 fps accurately. Would it be worth the money to install a SSG?
    Charles

    Link

    ajshoots
    Participant
    Member

    I have a huma regulated gen 2 .177 that used to get 50 shots at 900fps. I built my own SSG and now get 90 shots at 905fps with 10.5gr premiers.

    So, yes, an SSG is worth it in my opinion.

    Link

    bill_dd97
    Participant
    Member

    Yes it is.

    Link

    cca50
    Participant
    Member

    I guess I have my answer. Thanks for the replys
    Charles

    Link

    X27
    Participant
    Member

    What does SSG stand for?

    Link

    TDK
    Participant
    Member

    Per Bob Sterne the brains behind the design,  SSG = “Stopping Spring Guide”

    Link

    kk4iz
    Participant
    Member

    location of where to buy one
     

    Link

    ajshoots
    Participant
    Member

    WAR sells one and Steve in NC sells one on the yellow forum called an FFH. If you are a DIY type, they are very easy to make and can be less than $10 in hardware store parts.

    Edit: AOA sells the Steve in NC FFH version as well.

    Link

    npunk42
    Participant
    Member

    If you want quick and easy, the WAR SSG is the way to go. Once you get the idea in your head, tuning couldn’t be easier.

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.