I am really worried I have a bad problem. My compressor is a little less then a year old. It has 8 even hours run time. AoA sent it to me set up with the exception of adding the two antifreeze bottles.
In addition I am running an Alpha filter while in operation and bleeding filter after fills to let out moisture.The Alpha filter is standing straight up with arrow pointing up.
Now I would take a screen shot and point to the problem area but I have no idea how to upload here on AGN. Please bear with me as I describe the problem area.
Using the control panel as the front of unit. On the motor in front of the cooling fins there is a round shield covering the motor. At the very front underneath that cover there is a screw on the very bottom. At that screw and I cannot see any further up with the side panels off. That screw has a drip coming out much like the viscosity of tree sap.
My roommate an ex mechanic says he thinks it is oil.
I have no idea?
Is anyone able to help here?
Thank you all very much!
Eamon
In addition I am running an Alpha filter while in operation and bleeding filter after fills to let out moisture.The Alpha filter is standing straight up with arrow pointing up.
Now I would take a screen shot and point to the problem area but I have no idea how to upload here on AGN. Please bear with me as I describe the problem area.
Using the control panel as the front of unit. On the motor in front of the cooling fins there is a round shield covering the motor. At the very front underneath that cover there is a screw on the very bottom. At that screw and I cannot see any further up with the side panels off. That screw has a drip coming out much like the viscosity of tree sap.
My roommate an ex mechanic says he thinks it is oil.
I have no idea?
Is anyone able to help here?
Thank you all very much!
Eamon
