I need a good, easy to read and in depth instruction manual on how to replace an o ring when it goes out on my daystate wolverene and verminator mk2. Are there any videos or good instruction manuals? I'm not about to take apart a $2000 rifle and not know how to put it back together.. Any help would be appreciated. Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
O ring replacement
- Thread starter kyler2643
- Start date
You asked this exact same question back in October 24, 2015 in your post O-rings?. If you are hoping for a manual on o-ring replacement, good luck as there aren't any for the FX or Daystate line of rifles.
October 24, 2015 at 12:28 pm
Your Wolverine is similar to the FX in that is uses a breach o-ring instead of probe o-ring. If your Wolverine is a .22, the breach o-ring is a metric 5mm x 1.5 mm Buna-N A70; Here is a reference I posted on DayState O-rings: DayState O-rings – A Reference for Owners.
There is also an FX Veriminator MkII Exploded Drawing available that shows the various o-rings and sizes used in the rifle. Here is the link: http://www.fxairguns.com/wp-content/uploads/2014/03/Verminator-MkII.pdf
October 24, 2015 at 12:28 pm
There are plenty of posts on changing o-rings. Here is one I posted on the FX: http://airgunnation.dev/topic/fx-royale-o-ring-replacement/?view=all#post-36312kyler2643How often do you change your o rings? and where can I find instructions how to change them? I've got a daystate wolverene and fx verminator.
Your Wolverine is similar to the FX in that is uses a breach o-ring instead of probe o-ring. If your Wolverine is a .22, the breach o-ring is a metric 5mm x 1.5 mm Buna-N A70; Here is a reference I posted on DayState O-rings: DayState O-rings – A Reference for Owners.
There is also an FX Veriminator MkII Exploded Drawing available that shows the various o-rings and sizes used in the rifle. Here is the link: http://www.fxairguns.com/wp-content/uploads/2014/03/Verminator-MkII.pdf
"kyler2643"Thanks for the help guys!
Upvote 0