Ninja EZ PCP Fill System

Hi Guys and Gals. Today I have a new item to offer. 

The Ninja EZ PCP Fill System



Features include:

• Made in the USA
• One handed valve operation.
• Valve is slow fill.
• Valve is self venting
• Hose is 21" from bottle to end of female foster and is anti whip if not attached to a male foster fitting.
• 2 gauges ... one for bottle pressure and one for fill pressure.
• 90 cu/in CF Bottle ... roughly 18 cu/ft of air.
• 4500 PSI fill pressure. Unregulated Output pressure is same as what is currently in bottle. 
• 3lb 13 oz filled weight.
• Priced competitively against comparable models at $399.95 and I'll include free shipping in the lower 48 states of the USA.
• Add $15 for shipping to Alaska or Hawaii via Priority Mail 3-Day!

I have one of these for demo use and it is the slickest fill solution available that I have ever used.

I can also provide the EZ valve / hose / gauge assemblies and an adapter to use these on your large SCBA bottles or I can provide a fixed pressure regulator and adapter to fit your large bottles set to 3K PSI or a lower value you specify for tethered shooting. EZ Valve assembly bare is $219.95 and the required adapter runs about $55 delivered although you can order the adapters direct from Komptec for $39 plus shipping.

T3P Ranch AGS. PM me or contact information is available via my web site on the page linked below:

https://www.t3pranchags.com/about/