New Looks for my .22 Carbine and .45 BullPup

Forums PCP Airguns New Looks for my .22 Carbine and .45 BullPup

  • Views : 406
  • Link

    Nomadic Pirate
    Blocked
    Blocked

    I just replaced the Airtube in my .22 storm with the longer version one, I than got Neil to cut the shroud off a couple of inches. 

    I’ve always been a fan of guns where the airtube and barrel are the same lenght. 

    Total length now it’s 37″ 

    On BullPups I’m not a fan of the Grip attached to the rear of the stock, I find true Pistol grips much more conducive to carrying the pups in the field, and to be able to get a more straight grip while shooting. 

    So I cut the extra off  the synthetic stock is plenty strong so it can take it. 

    ==============================

    Link

    SPDRCER
    Participant
    Member

    The Rainstorm looks GOOD!!  How much of an increase in volume does the new tube give you?

    Craig

    Link

    Nomadic Pirate
    Blocked
    Blocked

    “SPDRCER”The Rainstorm looks GOOD!!  How much of an increase in volume does the new tube give you?

    Craig

    
Not much, the tube is only 1″ longer ( the one used on the BullPups) 

    Link

    linsfreak
    Participant
    Member

    nice!

    Link

    FearnLoading
    Participant
    Member

    What scope do you have on the bull pup ? It looks small enough to be a UTG bug buster. I like the small size. Goes well with the gun

    Link

    Nomadic Pirate
    Blocked
    Blocked

    Yeah, I like a small scope on that pup.

    It’s just a straight 4×32 Leapers.

    Link

    AJ3
    Participant
    Member

    Pirate

    Have you ever had to reglue the butt pad on your Max ML?  Mine on my ML 22 has come loose and off twice now…have been securing with rubber contact cement and obviously doesn’t hold for long.  Just curious if you have had to reglue yours and if so, what type of glue did you use?

    Thanks

    Link

    Nomadic Pirate
    Blocked
    Blocked

    Yes it did, at the very bottom where it gets stressed been on the bipod, ….I just epoxy it :) :)

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.