New custom stock for FX Crown

Forums PCP Airguns New custom stock for FX Crown

  • Views : 694
  • Link

    Maddad
    Participant
    Member

    Dose anyone know of anyone making after market stocks for the FX Crown? I have contacted FX USA and got some prices but I was wondering if there are any other choices? I have the synthetic stock but has broken where you would mount a rail for a bipod. It got bumped on a ruff table and the rifle moved but the bipod didn't. I have fixed it temporarily but don't think it will last long. Wish that FX would reinforce that part of the stock. Anyway if anyone knows of a stock maker that is good and cost effective it would be appreciated? Thanks!

    The red line is where it broke. 

    Link

    Mrshosted
    Participant
    Member

    I go looking for somebody with a transfer router,  cut your self one out of walnut. 

    If you could post some pictures of the damage. You might get some suggested ideas for a more premature repair ideas

    Link

    Pulpit
    Participant
    Member

    You can buy one at air gun depot for 299.00, I'm not sure if that's cheaper than what you were quoted by fx.

    Link

    guod123
    Participant
    Member

    As Mrshosted posted a picture could help. I've never seen the stock a totally hollow shell? Or is it a reinforced with ribs and longitudal structuring? 

    Link

    T3PRanch
    Participant
    Member

    Does the 3 year warranty not cover the stock?

    Link

    Maddad
    Participant
    Member

    Same price, but I'm a Big man and need about a 1-1/2" longer stock than the stock stock 😉  , and before I shell out ~ $800 to $900 Canadian, for a FX wal. Or Lam. Stock, I thought I would look around for something I can customise to my body. 

    Link

    Maddad
    Participant
    Member

    The inside is what I think called closed cell foam. Bunch of tiny bubbles. Sorry I didn't take a picture of the gun when it was broken. No reinforcement inside that part. 

    Link

    Maddad
    Participant
    Member

    Looks like it's not covered under warranty, At least not for Canada it seems. 

    Link

    Maddad
    Participant
    Member

    Just a update

    I put a bigger rail on it and glued a support in that area. Works good until Scandinavia Airguns comes out with their Ver for the Crown.

    thanks for the replies. 

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.