Does anyone know the measurement to enter into ChairGun for the sight height of an EdGun Dedal 6x scope sitting atop a Leshiy?
Need Leshiy sight height for ChairGun
- Thread starter ctshooter
- Start date
Yes - the pic rail is integral with the sight itself. Any Dedal 6x on any Leshiy will have the same sight height.
I know I should just get the tin foil and measure this myself, but it's such a pita. I was hoping someone did the task already.
I know I should just get the tin foil and measure this myself, but it's such a pita. I was hoping someone did the task already.
Upvote 0
Take the diameter of the scope plus the diameter of the barrel add them together and divide that in half, then you add the measurement between the bottom of the scope and the top of the barrel, that is the scope height.
Upvote 0
While the previous poster is correct, we all know that it’s very hard to measure that via the traditional way on a Leshiy.
But here is a little trick I came up with:
Fold the gun in half, and (temporary) put the scope in such a position on the rail so that the end of the eyebell is flush with the breech. Now it is very easy to use the formula from above, or even to measure from the center of the bore to the center of the eyepiece directly with calipers. Easypeasy!
But here is a little trick I came up with:
Fold the gun in half, and (temporary) put the scope in such a position on the rail so that the end of the eyebell is flush with the breech. Now it is very easy to use the formula from above, or even to measure from the center of the bore to the center of the eyepiece directly with calipers. Easypeasy!
Upvote 0