I have a Brocock Compatto that I wanted to mount my scope using some BKL single strap rings. The problem was that the dovetail on the Compatto was .595 opposed to my other rifles which measure .465
Which is when I came across a simple solution:
First - remove the hex screws
Second - insert the hex screws into the offset hole on the opposite side. Slowly tighten the hex screw which will push apart the mounting bracket
Third - slip your scope/rings onto the dovetail rail and then remove the hex screws
Fourth - reinsert the hex screws into the original side and tighten
Voila! - BKL rings now fit on larger dovetail rails
Which is when I came across a simple solution:
First - remove the hex screws
Second - insert the hex screws into the offset hole on the opposite side. Slowly tighten the hex screw which will push apart the mounting bracket
Third - slip your scope/rings onto the dovetail rail and then remove the hex screws
Fourth - reinsert the hex screws into the original side and tighten
Voila! - BKL rings now fit on larger dovetail rails