My project full auto airgun "Prototype"

Forums General Airgunning My project full auto airgun "Prototype"

  • Views : 660
  • Link

    Zonder
    Participant
    Member

    This airgun creatred by me.Project almost done.

    Videos.Thx for watching. 

    https://youtu.be/0jcJU19dNlo

    https://youtu.be/JHMCoLPKc2I

    Link

    Crank
    Participant
    Member

    Zonder,

    Quite an interesting first post! I expect that many will hope that you share more information about this. Welcome to the forum.

    Mark

    Link

    Boombots74
    Participant
    Member

    Zonder,

     

    I have been in this hobby for about 4 years and my dream gun would be a bullpup with full auto capabilities and precision. I see 2 of the 3 being satisfied. The huben k1 satisfies all 3 but is ammo specific. Wishing you great success and speed to production. My money is already on the table for you to take. Haha.

     

     

     

    Link

    stoti
    Participant
    Member

    How do you feed it? Capacity?

    Link

    Zonder
    Participant
    Member

    Thank you very much for the kind words ! Mark thanks for the hospitality
    I use mag from Crosman Benjamin Marauder. 10 bullets with caliber 4.5. JSB DIABLO EXACT HEAVY 4,52
    It would be very interesting to test the real characteristics of Huben. I consider the most advanced airgun to date. But I wonder what will be the resource of such complex details and so many of them. But in any case, I take off my hat before the designer, I do not understand how such complex mechanisms are designed. But again, the main issue in longevity.

    The prototype has a stable speed of bullet departure from 240 to 130 bar.

    I apologize for my English. It's very interesting to show your work to people from another part of the world

    • This reply was modified 4 months ago by Zonder.
    Link

    Crank
    Participant
    Member

    Zonder,

    Feeding an air rifle with a high rate of fire will always be a hurdle and I applaud your choice of a commonly available magazine to do your prototyping with. Many designs have been doomed by expensive/unavailable replacement magazines. The design of your bullpup looks very familiar, did you start with a current production model and construct your own breech? I will second the support from Boombots74 and be waiting to have you take my money. ? 

    Mark

    Link

    fe7565
    Participant
    Member

    Quite impressed how it operates. What was the most difficult part to make? How reliable is the magazine feed?  How many shots per one tank fill?  

    Link

    Gunnertrones
    Participant
    Member

    So this is a true full auto – you squeeze the trigger and the pellets runs out rapidly.  Yes?
    Or, is it possible to pull the trigger and get one shot at a time, like a half auto?  I think that would be a preferable option for a scope gun.

    Link

    Harmless
    Participant
    Member

    was just batting an idea around in another thread and this looks like a place that would be good for it. Remote tethered bottle, like paint ballers. I assume you burn through the air quick with that full auto, if you were to remotely tether a bottle on a pack, you could even remove the cylinder from the gun reducing its weight and increasing it's shot count. 

    Link

    Zonder
    Participant
    Member

     

    Mark in the prototype from the factory standard only drum Maragder and 350mm barell of some air of Russian production. Fidget, I do not even remember where he took it. Everything else is taken from the head. Here everything is not standard, look at 8 which are not here. Well, at the expense of design, bulpup is a bulpap. The most interesting will be ahead, I have not told much yet. And you have not noticed yet. Hint. Where the hummer picks up the energy to open the valve))).

    Link

    Zonder
    Participant
    Member

    fe7565

    Quite impressed how it operates. What was the most difficult part to make? How reliable is the magazine feed?  How many shots per one tank fill?  

    The development took a long time, when it was difficult for me to say what was the most tad. There are a lot of things that are not stadnart. One of the difficulties was that all pellets with a rate of fire reaching 1200 were poured out with the same initial speed. 281-279-282-282-279 ….. and not 280-275-270 — 250-250 …. magazine works very well. It's not even expected. Since the trunk is short only 350 mm and the speed is 280 0.68 then the number of shots from one tank is not very large 60-80. But there is a classic economical valve. By the way, the power can still be increased. The capacity of the valve and the rest is enough for the next caliber. I made a reserve just in case.

    • This reply was modified 4 months ago by Zonder.
    Link

    Zonder
    Participant
    Member

    Gunnertrones

    So this is a true full auto – you squeeze the trigger and the pellets runs out rapidly.  Yes?
    Or, is it possible to pull the trigger and get one shot at a time, like a half auto?  I think that would be a preferable option for a scope gun.

    The prototype has three shooting modes, full automatic, semi-automatic, and single with manual locking gate.
    
    • This reply was modified 4 months ago by Zonder.
    Link

    Zonder
    Participant
    Member

    Harmless

    was just batting an idea around in another thread and this looks like a place that would be good for it. Remote tethered bottle, like paint ballers. I assume you burn through the air quick with that full auto, if you were to remotely tether a bottle on a pack, you could even remove the cylinder from the gun reducing its weight and increasing it's shot count. 

     

    We do this for the MR-661K drozd. Here it is very cool, someone is connecting the fire extinguisher https://imperiya.by/video/CekQGxbTigT/MP_661k-drozd-bunkernyiy-i-ognetkshitel.html

    Link

    Zonder
    Participant
    Member

    Friends, I developed several semi-automatic devices for different principles of work. This was a preview of my most interesting work. Subscribe to YouTube, later with time other videos will appear, including longer ones, there will be more information. I want to show about the modes of shooting of the Prototype.

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.