My new Kral NP-03 "pistol"

Jump to latest Follow Reply
rangur1

rangur1

Member
Jan 4, 2018
2,393
1,040
oceanside, peoples republic of new york
1585791190_10635581825e8540d6c76fc7.30433409.JPG
1585791192_8577861195e8540d8814784.33439612.JPG
1585791193_1684246085e8540d9cc8761.68680136.JPG


Just some eye candy. No i have not shot it yet as in came in LATE today. pulled the back stock , threw on a primary arms red dot with big eye relief. and capped it with a donnyfl tanto.

update shot count / power high 20 shots 739 fps-654 fps 30-23 FPE , medium 25 shots 623 fps-572 fps 21-16 FPE , low 40 shots 437 fps-406 fps 11-9 FPE out of the box. 
 
marflow , mikeVV, Bravo1956, i appreciate your perspectives. obviously , this is not a true pistol. that was why i put it in "quotations" it's really a backpack gun that's been pistolized. , it's 28" long with the mod. but fairly light. i will post groups shot with 2 hands , shooting freehand. i could not even hold an HW44 steady with one hand. and this guy is for pesting close quarters , as all my guns are. i was never a 10 yard target shooter. I was looking for a "pistol " in 25 cal. repeater , with approx 25 FPE level. The HW44 , which i liked a lot, was about 19" with the mod. 22 cal was about 17 FPE. Steve Scalli shot it with a bipod to maximize accuracy at distance as i would do to shoot target , or ethically pest. I admit ,this gun is a tweener , i was not sure to list it in pistol or rifle section. certainly not trying to mock traditional pistol shooters.
 
Upvote 0
1585988398_6874654535e88432ee38661.53292698.jpg


Mine came in today. Removed shroud to clean barrel real good. Had a barrel band so used it and kept shroud off for now, fill port cover from puncher breaker.

Trident moderator, bugbuster, high rings for now, but will order offset mount I think.

Like the way it feels, and while single hand pistol shooting isn't going to happen, when I removed the shoulder stock and fired a few shots, it balances pretty well, it's going to be fun shooting like this.


 
Upvote 0
1585988398_6874654535e88432ee38661.53292698.jpg


Mine came in today. Removed shroud to clean barrel real good. Had a barrel band so used it and kept shroud off for now, fill port cover from puncher breaker.

Trident moderator, bugbuster, high rings for now, but will order offset mount I think.

Like the way it feels, and while single hand pistol shooting isn't going to happen, when I removed the shoulder stock and fired a few shots, it balances pretty well, it's going to be fun shooting like this.

Click to expand...

i also removed the shroud and attached the moderator directly to the barrel and it makes the gun quieter. and no single hand shooting is not going to happen freehand. will try red dot sight first. if not happy may go to scout scope.
 
Upvote 0


update shot count / power high 20 shots 739 fps-654 fps 30-23 FPE
Click to expand...

I didn't shoot a full string prior to installing the regulator. When it came time to adjust the hammer spring, mine out of the box was pretty much maxed out.

So I backed it out a few turns until fps settled in at 30 fps then shot a 20 shot string 734 - 666 fps. 1 to 15 are 734 - 717.

What did your numbers look like?

Also Trident moderator not very effective, so I am using a DonnyFL Ronin, which looks funny on the end of the barrel, but its whisper quiet. Ordered a Neil Clague moderator for it today, until then I'll leave the Ronin on it.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu