Was at the range Monday and my Impact locked up when I cocked it the lever would not go forward. I couldn't remove the magazine or remove the pellet from the chamber. I removed the bottle and barrel so there would be no chance of a miss fire.
Went home and took the gun apart and found the problem. On the bottom of the cocking block there is a steel pin pressed into the block this is where the cocking arm pivots on. Well the pin came out and dropped down and locked up against the cutout in the receiver. I didn't want to send it back to FX so I repaired it myself. I drilled and taped for a set screw in the cocking block for a grub screw. I notched the pin for a flat spot so the grub screw would hold the pin in place. I figured if this happened on this gun it could also happen on my other Impact. Don't want to have a lockup at a match.
Both of the Impacts were bought in late Dec 2017.Has anyone else had this problem ? You can check your gun and see if the pin is dragging on receiver by pulling the charging handle back just a little and if it is dragging you will see it.
Went home and took the gun apart and found the problem. On the bottom of the cocking block there is a steel pin pressed into the block this is where the cocking arm pivots on. Well the pin came out and dropped down and locked up against the cutout in the receiver. I didn't want to send it back to FX so I repaired it myself. I drilled and taped for a set screw in the cocking block for a grub screw. I notched the pin for a flat spot so the grub screw would hold the pin in place. I figured if this happened on this gun it could also happen on my other Impact. Don't want to have a lockup at a match.
Both of the Impacts were bought in late Dec 2017.Has anyone else had this problem ? You can check your gun and see if the pin is dragging on receiver by pulling the charging handle back just a little and if it is dragging you will see it.