Motorhead still tuning?
- Thread starter TEXAS
- Start date
Perhaps not since he is working for JSAR now. Maybe he will chime in. Ed, the Airgun TuneMeister at airguntunemeister.com is a frequent poster at Airgun Warriors. I haven't used his services but he surely seems to know what he is doing.
Upvote 0
Ed goes by ekmeister on Airgun Warriors. I know he works on springers but if that means springers only I do not know.
Upvote 0
I have used Motorhead, John in PA, and David Slade, all did great work.
Going to send my HW30 to John in PA soon.
Going to send my HW30 to John in PA soon.
Upvote 0
Yea ... my tuning services are in a holding pattern until i know for sure I'm headed to Oregon to work at JSAR in January 2020.
If i make the employment decision to go up noth my tuning bizz for now is no more. If the time line extends or does not materialize i will continue tuning on a limited basis.
have been stating such for those who inquire ,, and will here too, CHECK WITH ME mid / late Jan 2020 and will know more on the subject.
Best Regards,
Scott S
If i make the employment decision to go up noth my tuning bizz for now is no more. If the time line extends or does not materialize i will continue tuning on a limited basis.
have been stating such for those who inquire ,, and will here too, CHECK WITH ME mid / late Jan 2020 and will know more on the subject.
Best Regards,
Scott S
Upvote 0
Lost track of who and where with tuners some years back.
I recall motorhead from his early days on GTA.
I used Shadow a few times just to keep him busy.
Got a side ways Hatsan that needs corrected from a tuner "I let try"
Crazy mess
I recall motorhead from his early days on GTA.
I used Shadow a few times just to keep him busy.
Got a side ways Hatsan that needs corrected from a tuner "I let try"
Crazy mess
Upvote 0
Who is John?
Is he that Airgunners edge guy that does all the Hatsan vids?
How you reach him?
Is he that Airgunners edge guy that does all the Hatsan vids?
How you reach him?
Upvote 0
Yikes, we've been spoiled here in NorCal by Scott. Combining with JSAR will be incredible combination, but we'll miss having our friend and mentor so close and available.
Best wishes either way- I imagine my paycheck will be following Scott where ever he ends up...
Best wishes either way- I imagine my paycheck will be following Scott where ever he ends up...
Upvote 0
G
Guest
Guest
Several weeks have passed
Several calls and messages left
Still no answer from any of them
John Thomas did not answer his phone? Here is his Email. John Thomas <[email protected]>
I have notified him that this thread is open. He has never failed to impress me with his skill, reliability and integrity.
Relevant content:
https://www.airgunnation.com/topic/model-36/#post-180366
https://www.airgunnation.com/topic/quit-screwing-around-lets-see-those-springer-groups/page/2/#post-118591
Upvote 0
jsar is a good place to do some tunings. they got all the machines 
there must be some kind of agreement! sweeping the floors after the working hours ?
there must be some kind of agreement! sweeping the floors after the working hours ?
Upvote 0
Contact with John has been made.
Taking a Hatsan 135/30 to hopefully new levels.
Thanks again for directions
Taking a Hatsan 135/30 to hopefully new levels.
Thanks again for directions
Upvote 0