Moisture on barrel Breach end Brocock bantam HR

Forums PCP Airguns Moisture on barrel Breach end Brocock bantam HR

  • Views : 219
  • Link

    Kamanthi-
    Participant
    Member

    Hi I have just purchased a Brocock bantam HR I have notice some moisture building up near the end of the barrel at the breach end. Could someone tell me if this normal all is something I should be worried about.

    • This topic was modified 1 week ago by Kamanthi-.
    Link

    OrdnasNS
    Participant
    Member

    Perfectly normal if You shoot in moist conditions and if humidity is high in air. No worry.

    Link

    sonny
    Participant
    Member

    I live in s.Florida very high humidity and have never experienced that i wounder if your fill device has dry air.

    • This reply was modified 1 week ago by sonny.
    Link

    leadfoot
    Participant
    Member

    Usually the "end of the barrel" is the muzzle, but you're saying the breech, which is where the pellet is loaded. Does it build up outside of the barrel or do you notice it inside as a pellet is loaded? As suggested, your air supply sounds like it has some moisture issues.

    Link

    JCD
    Participant
    Member

    My $1 bet is your breath condensing on cold metal….

    Link

    Mike_Lenardon
    Participant
    Member

    Perfectly normal. My Wildcat and my Cricket both have moisture build-up anytime I shoot. It's my breath exhausting on to the regulator area

    Link

    Kamanthi-
    Participant
    Member

    It’s where the barrel screws on I have noticed moisture left and right side. This only when I’m Shooting it.

    Link

    Kamanthi-
    Participant
    Member

    Hi it’s where the barrel screws on left and right side.

    Link

    Kamanthi-
    Participant
    Member

    Hi it’s where the barrel screws on. I’ve noticed when I’m at the range moisture builds up on the left and right side where the shroud and barrel screw on.

    Link

    Kamanthi-
    Participant
    Member

    Hi thanks for getting back to me. The moisture    Come from the left and right side where the shroud and barrel screws. So you are saying this is normal. What causes this could you explain please.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.