Mini Review of the AEA Terminator 357

It's quieter than my Bulldog was I was shooting it my backyard and have neighbors on both sides no problem with them and the piston works great I haven't rapid fired it yet figured I need to put some pellets down range and get it broke in first.

Here's a couple more shot strings, I talked with Zach and he talked to his guy in China and he thinks my tanks aren't getting a full fill an told me what to do to fix the problem, he also said the shot strings are to low should be 950fps so the fill pressure may be contributing to the low velocity. 

Hey fellas just got back from visiting family for Christmas, well I figured out why the side gauge was not reading the same as the front it needed to be turned a little and it then started registering the same as the front but it had leaked down while I was gone so I contacted Zach he told me they had to bleed the air off to ship and check for air leaking around the side gauge an sure enough it was I bleed the pressure back off and Teflon taped the threads and seems to have stopped the leak for now.

I decided to try some 95gr .356 boolits I had for my 380 in it and they fit in the magazine just fine no binding I fired 10 shots with 2 failures to recock itself accuracy wasn't to bad at 25yds first shot was 830fps last shot was 777fps 53fps difference over 10 shots but the first 7 were only 2 to 10fps different. I will be doing more testing with these and I just got my NOE .356 84gr mold in yesterday and I'm prepping it right now to start casting then we'll see how they do in the next day or 2.

DanieIL 

I sorry haven't tried anything heavier and I don't have any polymags but a fella on GTA has tried some NSA slugs and some others not working real well if I remember right.

I never got around to shooting slugs it started leaking air in more places than I wanted to mess with and sent it back for a refund.