Matt Dubber’s FX Impact X Gauges?
- Thread starter C_Money
- Start date
Those don’t look like sleeves to me based on the one at the butt of the gun... Also I haven’t seen a Wika or any other gauge with color on it other than white from the first picture
Upvote 0
These are from a hand pump, I fitted them to my reg chamber so that I could fine-tune my reg a little better. The factory gauges aren’t great, but keep an eye out for new stuff at IWA
Upvote 0
These are from a hand pump, I fitted them to my reg chamber so that I could fine-tune my reg a little better. The factory gauges aren’t great, but keep an eye out for new stuff at IWA
Thank you sir! Really hope all this new stuff can be added to the gun I already have
Upvote 0
Just a note, the stock gauges are just indicators, at best...when off the reg, I notice there is 10 bar difference between the two. For tuning, I would recommend indexing your reg settings by turns out of the reg adjustment screw, rather than using any gauge. My experience has been, after bleeding the gun (say for maintenance), I can set the same turns out from stop (1 7/8 for my tune) and be within 3 fps after recharging. Using the gauge, lucky to be within 10- 15 fps.
Upvote 0
I switched all my FX Impact X gauges over to edgun digital and they are precise. Match manifold glycerin filled gauges exactly. Highly recommend this mod to any FX gauge. Also has many features beyond simple pressure readout.
Upvote 0
Those are the new FX gauges that come standard on the MKII Impact along with a high capacity Sideshot magazine.
Upvote 0