March 1-10 Shorty Dual Reticles

Received my March 1-10 , from Don @ Long Range. Weighs a tad under 18 oz. Found an old Aimpoint wide ring, that holds it securely. Two narrow rings might work too. The illuminated dot is daylight bright & in the second focal plane so it stays the same size. Probably be a good 100 yard & less hunting scope. The rets are thick, but for my poor eyesight that is actually a plus. Probably not for those who are shooting at pin heads. Never shot it any, just mounted it, so can't say anymore. 

20210217_164314_resized.1613692436.jpg
20210218_181751_resized.1613692436.jpg



 
  • Like
Reactions: JamesD.
The image below is not very good. I don't think I have the Tactacam set up right , it was raining , I had a window open and heat was leaving. But you might be able to get the idea. The image in the scope is crisp & clear. The mounted squirrel was @ 50 yards. Oh, no mounted squirrels were harmed in this movie. ( if this does not open , I will try again SAT.)

download.png



 
The image below is not very good. I don't think I have the Tactacam set up right , it was raining , I had a window open and heat was leaving. But you might be able to get the idea. The image in the scope is crisp & clear. The mounted squirrel was @ 50 yards. Oh, no mounted squirrels were harmed in this movie. ( if this does not open , I will try again SAT.)

download.png



Thanks for the video, fun to watch the DFP reticle in action and the illume.
 
Ok here is one at 40 yards 4-10 power. The image in the scope is crisp & clear. I just cant get this tactacam to get a clear image. But you can get the idea. What i am seeing today, it is going to make a great squirrel rifle scope under 100 yards & that is more than enough to fill my needs.

download.png




& one @ 50..


download.png








 
@ Odoyle I have not noticed it, but use mostly 6-10 but will check that out tomorrow. I shot lot today 40 & 50 yards & I found 6-8 power my favorite. The illuminated dot really helps me too. 

When you have it on higher powers. You do notice the numerals on the horizontal part of the ret get a little hazy. But If I had not been made aware of that before hand, I am not sure I would of noticed that. Also sometimes when moving my head around & messing with the SF, seems I can notice the movement between the rets , kind of hard to explain. But you know you have two rets that sorta overlay & if you move your head just right you may notice that. But it does not affect anything at all. Just saying. I am thinking I can set my parallax at 30 & be good from 20-50 yards. It seem I am moving it very little. Definitely going to remove the big wheel, not going to need that.

I like it more today , than I did yesterday. It is an easy scope to get behind & my single Aimpoint ring has it perfect height for a good cheek weld. Here is 50 shots as fast as I could cycle & get back on target in 10 mph crosswind, 50 yards & scope set on 7 power & dot on 4 illumination. I love the dot. 

20210219_135252_resized.1613784039.jpg
20210219_141225_resized.1613784039.jpg