Marauder pistol AR stock question

I am considering doing the same as I don't like the stock stock either. Check this one out though 

http://www.alchemyairwerks.com/store/p110/P-Rod_AR%2FM4_Rear_Stock_Adapter_and_Mounting_Kit_-_Everything_but_the_AR%2FM4_Stock_Itself.html

seems like 70 bucks is a bit fargin steep for what it actually is

Go to Pyramydair and read Tom Galoard's articles.[color=rgb(25.098040%, 25.098040%, 25.098040%)]R.A.I. adjustable AR stock adapter: Part 1 [/color]

It will answer your questions. Yes, I prefer the AR stock on my Marauder Pistol. You can also buy the folding adapter on Amazon. Make sure you use the proper buffer tube.

The AR style stock does look nice. When adding it all up, I felt it was too highly priced. With that said, the Prod factory carbine stock is not sufficient as it leaves you with no cheek-weld. My solution was to buy some delrin tube and stainless fasteners for about $30 dollars and some handy work with drill and Dremel. It most definitely improves the comfort and stability of the Prod. 

My set up but it will go on a Prod.

Get the adjustable RAI as you may find it allows for a lower scope ring setup vs the 3-D printed, non-adjustable offering.

Oh, and don't forget you'll want to choose a mil-spec buffer tube or commercial depending on the stock you have on-hand. Either tube will have the same threads to thread into the RAI but the stock may not fit the incorrect tube size.