Marauder carbine (P-rod)

https://www.crosman.com/airguns/air-pistols/marauder-pcp-air-pistol-22-cal



If you scroll down you will see the specs, there is a button to download the parts diagram. You can email or call with the parts you want/need. You'll notice how interchangeable everything is with crosman. Thats probably the number one reason I like them so much, their customer service is pretty hard to beat. I've orders complete guns in just parts, I think they are the only airgun company that will do that

My Prod was my 1st PCP. I absolutely love it! I keep buying other PCPs only to find myself going back to the Prod. I also have a 1300kt and my Prod out performs it by far. If you like your 1300kt you’ll love the Prod. I think everyone should own one. I put a 4-16x40 scope on it also the Ar stock adapter with a TKO and that’s it. I can hit 2” steel all day at 50 yards and 1” 6 out of 8 shoots. I’m sure someone better then myself could do better. I say just get one you’ll be happy you did. 

 Congrats! If your not familiar, do a little research on the bstaley oring mod/ buffer. Helps flatten the shot string.

Prod is one of the best guns i have had for short range shooting (up to 30 meters) is my rat slayer

RJ, Thanks for the info on the chote cheek rest riser.. Love the P Rod.

Chuck,

This is my Weerod. Cheapest gun I own, favorite gun I own.

Congrats! If your not familiar, do a little research on the bstaley oring mod/ buffer. Helps flatten the shot string.

Click to expand...

I also use the bstaley and have a regulator installed. Though mine if the rifle not pistol. See if the pistol has the lawyer spring on the trigger like the rifle. Removing it will soften up the first stage. Its a free mod and would be the first thing I do along with the o-ring mod. Then go from there. Stronger hammer spring and opening up that transfer port and even the barrel port for example. 

I have 5 of the P-rods, from bone stock to modified, the first one I purchased , was a total piece of crap, purchased used with a scope, paid way too much, sent it to Citrus Air, Mike installed a 20 inch barrel & tuned it , I was in a bike accident while it was being modified, tore my left rotator cuff, & never really shot it more than a couple of mags, my bone stock one is really accurate, & I have 3 with lother Walter barrels, drilled ports & heavy H/springs, the last one I got has a 12 # h/spring, & very hard to cock, but will shoot in the high 800's, one of these days in the spring early summer I have a JSR valve I will install in one of them, just have to decide which one.

Prods are fun! 

I built this one a few years ago. Mounted it in a Boyd's stock for the Disco. Great little carbine. I believe I was getting 24 shots in the mid 700' with CPUM 14.3. Killed several squirrels with it out to 30-40 yards with no problem.

My tricked-out p-rod

MM TJ barrel

Magpul mid length AR forearm

Bluefork trigger group 1 lb “glass rod breaking trigger pull no creep

AR stock adapter and AR stock

Hogue pistol grip

B-Staley mod

Shroud moved forward for 16 inch overall

AR 15 flash hider

Bushnell AR Optics 4.5x18 qd rings

UTG Reflex on lever base

Eats just about anything



Roachcreek

My PRod, and where I’ve got it set at. Like all others on this tread, I agree it’s a sweet little gun to have. Check out Hill Airguns.com, as he’s got a ton of aftermarket goodies for this thing.

I have 10 airguns based on based on 1720T/Prod based platform. Standard tubes, double tubes, long tube, and two pistols 1701P tube.

24 shots @ 16FPE is very doable with minor parts: TP opened to 0.110", slightly heavier hammer spring and o-ring buffer

I'm not aware of any production drop in barrel, in the length you want. .

20" Mrod barrel will fit prod with minor work. Some new flats on the barrel and a little off the breech end to line up TP and fit the mag.

Once crosman releases the schematic for the fortitude, can cut barrel to length and recrown. ie it doesn't have a choke.

A 14" barrel may fit within the existing shroud by just cutting off part of the AS/spacer. Add a LDC.

John....you should join a prod group I started a few years back. We have 800+ members (not sure if you're in the group). If interested Ill send you a link. 

I love my p-rod. Lite, accurate and fun. When I put my 22 suppressor on the end you can’t hear anything but the hammer fall. 

If you act fast, 25% off on crosman site, and get another 25% with AGNATION. Free shipping. $232.62

PROD

Just thought I'd stop and take a look at this thread and I'm glad I did. This is freakin cool as can be. Taking a P-rod and turning it into carbine rifle. Those wood stocks look fantastic with it.............I want one now.

is the marauder pistol quiet without a moderator? or Is it about the same as a 1720? I would like a short rifle and wonder if I would be satisfied with this as a carbine



thanks