Hello everyone,
So after many months of using the hill valve in my .25 marauder I decided to treat myself and get the cothran powerhouse valve. I've taken the rifle apart many times to replace the o rings so nothing was new to me. after installing the cothran valve I started to fill the rifle up and I heard air coming out from the end of the barrel. so I tried everything. I replaced all of the o-rings again and put the valve back in.(not a big fan of the transfer port design) Same thing. so I decided that I would just put the hill valve back in and contact wicked air rifles on Monday but I still have air coming out of the barrel with the hill valve. Row remember, I have already changed out all of the o-rings. what could be the problem? any possible solutions and advice is greatly appreciated.
Thanks,
Matt
So after many months of using the hill valve in my .25 marauder I decided to treat myself and get the cothran powerhouse valve. I've taken the rifle apart many times to replace the o rings so nothing was new to me. after installing the cothran valve I started to fill the rifle up and I heard air coming out from the end of the barrel. so I tried everything. I replaced all of the o-rings again and put the valve back in.(not a big fan of the transfer port design) Same thing. so I decided that I would just put the hill valve back in and contact wicked air rifles on Monday but I still have air coming out of the barrel with the hill valve. Row remember, I have already changed out all of the o-rings. what could be the problem? any possible solutions and advice is greatly appreciated.
Thanks,
Matt