I've got a leaking Cricket and have changed all o-rings except the gauge o-ring. I can't get in there without the socket tool and remove it. Ernest doesn't have any in stock. Can anyone help? Thanks
I needed one as well for my Vulcan not too long ago so I could replace the gauge. I ended up buying a 1/2" drive 15/16's 6point deep socket and had a buddy turn it down on his lathe. Works great. jk
Ditto to Eric I used a 1/2"X3" carriage bolt. hooked it up in a hand held drill stood to the left of bench grinder with drill in forward. A flat washer, lock washer, and nut is also needed. got just about there then used emery cloth sized and polished it, cloth in hand drill in other. If you want to go crazy a felt disc and some mothers paste will shine it up
Cool trick spinj with a 22 foot trailer that carries tools I'm guilty of who ever dies with the most tools wins, sometimes I can even find what I'm looking for
if needed i can lone mine to whoever needs it i would just like it back contact [email protected]. send shipping info and your contact info thanks john b