Does any body have a list of the O-rings for the Vulcan. I'd like to replace the old ring is the tank and regulator
Looking for a O-ring list for the Vulcan
- Thread starter Mrshosted
- Start date
If you have the owners manual for your Vulcan, it should give you the sizes in there. I have a Vulcan Tactic in .25 cal which is basically the Vulcan 2 with an extended stock on it and a cheek rest. My manual says that the air tube and regulator O-rings for the Vulcan 2 are:
4- 25.2x3 90 Duro
1- 9x2 90 Duro
3- 17x1.5 70 Duro
2- 3.5x1.5 90 Duro
1- 3.5x1.5 70 Duro
In looking over this parts list it appears to me that these o-ring sizes are for a 30 cal Vulcan because it lists the breech o-ring as being a 7.5x2 70 Duro. Now … whether the 30 cal is the same in the .22 and .25 cals inside the air tube and regulator, I am not sure. But if you are going to open up the air tank and start replacing O-rings, you might as well replace all of them.
It might be a good idea to call or e-mail Tony at Talon Tunes and ask him if these sizes are correct
www.talontunes.com
Hope this helps
4- 25.2x3 90 Duro
1- 9x2 90 Duro
3- 17x1.5 70 Duro
2- 3.5x1.5 90 Duro
1- 3.5x1.5 70 Duro
In looking over this parts list it appears to me that these o-ring sizes are for a 30 cal Vulcan because it lists the breech o-ring as being a 7.5x2 70 Duro. Now … whether the 30 cal is the same in the .22 and .25 cals inside the air tube and regulator, I am not sure. But if you are going to open up the air tank and start replacing O-rings, you might as well replace all of them.
It might be a good idea to call or e-mail Tony at Talon Tunes and ask him if these sizes are correct
www.talontunes.com
Hope this helps
Upvote 0
It all helps thanks. Its supper easy to take the tank off and remove the regulator. I used a 20" piece of 3/4 pvc, removed both end caps and simply pushed it out. It didn't take 10 mins to totally brake down the tank and regulator. Seeing the O-ring sizes I'll stop by hydra PAC tomorrow. And it o-ringed up for the next 5-6 years.
Seeing how easy the Vulcans are to work on just blows my mind. There like the small block Chevy of airguns. It wouldn't surprise me it I couldn't go to True Valve and find the replacement o-rings
Seeing how easy the Vulcans are to work on just blows my mind. There like the small block Chevy of airguns. It wouldn't surprise me it I couldn't go to True Valve and find the replacement o-rings
Upvote 0
Appears to me you got the Vulcan bug, really ought to try out the Tactic … I hate pushing my cheek against a cold piece of metal in the winter and it feels like you have a little more room to work with on eye relief with the Tactic along with being I-n-c-r-e-d-i-b-l-y accurate.
Upvote 0