List of big head, huge skirt .25’s?

Jump to latest Follow Reply
JamesD.

JamesD.

Member
Dec 9, 2015
2,436
182
NE PA, United States
I’ve read on GTA of some shooting regular Diabolo pellets between 750-950 from TJ .257 1:14 6R.

Until I get a power valve from R&L, a SHO TT’s, or the ultimate Noble valve, I know my valve can send 60 grain .22’s. So a longer no choke barrel with no blow by should allow EunJins and light weight .257’s.

One thing is I have an older 3600psi Luxfer 500cc tank with an FX valve in it. The M18x1.5 are the same but anyone change a 3600 250 SWP Luxfer to ring lock system?

What pellet skirts are so oversized single loading and blowing out of skirts will work for self stabilization in pellets from .257 on super low? Thick Harbor Freight powder coat or polymer tool coating? I’ve heard of pellets and slugs gaining 0.004”+ from that. Remember Black Mambas?

http://www.airgunhome.com/pages/pelletspecs.html#25

We need this updated. I’m gonna try the original 33.95’s and I bet they work. One way or powder coated they’ll work. What say you?

Lightest .257 mold I can get? It’s only a 27” and Air Force high flow new with variable top. Light years from top hat on stem with grub screw that wouldn't stay in place but 


 
I think you should try poly coated pellets and slugs just because it would be cool as hell to see how they perform in Airguns. 

I don’t think bore rider pellets would work that well. With only the very end of the soft lead skirt being well engraved it might not have enough “bite” to hold it into the rifling. Then the pellet flies straight down the barrel and shreds the skirt. 

After looking at the chart the Eunjins may have a decent shot of working since they will be engraved two thou on the head. I think most .25 pellets will give you a half thou engraving if your lucky. 




 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu