Let's see them D.I.Y gun stocks

Looks like you gave it some character...real nice.

Here are a couple of my DIY stocks.

Before-



After-



More afters-

Bb

Here is a stock that some one started but didn’t do the finish work on so I reshaped the stock to fit me and to enhance the laminate shapes . Here are the before and after pictures.

Not an air gun. Padauk wood. Shoots much better than the factory stock

The one in flame birch is finished, the other two still in process. Waxing and polishing remains. Another thread going for this project, but use the opportunity for an update. 

Where do dome of you get your laminate for stocks?

Boyds...Look for blanks

nice work all of you...

I have done some others but I’m not finding them at the moment. R9, 1377, QB78 HPA repeater conversion.

Been converting stocks for a ling time. Here are just a few:

Marauder in a P12 stock





R10 in an HW98 Stock

Marauder in another P12 with Fang Bull pup scope rail and trigger mod



Theoben MKII in tactical



Another Marauder in tactical



Rainstorm tactical



Blizzard tactical



And this is just a few. Tactical are the Ruger 10/22 aftermarket stocks.

Thanks for looking.

Here's a Hatsan model 95 stock I've been modding to fit the Hatsan Striker 1000x barreled .22 action. Getting close to done in Turkish walnut. I've done 5 Youtube videos on it thus far. Need to finish it up in the 6th instalment.



https://www.youtube.com/watch?v=azEr4tOBeGo

And how it looked when I received it from a fellow GTA member;

Just refinish AND RESHAPE jobs but here are a couple that I have done for my RAW's.

Before



After



Before



AFTER

This is a very fine shooting Huntsman Mk2 that I used for FT for years and felt it needed a better stock and wanted to try my hand at making one. I really admire the lines of some of the better makers like Steve Corcoran and Gary Cane but could not picture the final integration of things I wanted with nice lines.... so it was never fully completed. The cheek piece was partially cut so I could complete the shape but cut the lines while in board form. The main problem was the final shape of the fore end. Couldn't find a way to shape it in my mind.... but the semi-completed feels quite nice and I used it in several matches before moving on to a CRX ST.

Bob