Hi to all,
I wanted to change the caliber of my Leshiy .177, and I bought a .22 Diana Outlaw barrel. Being 12mm OD, only had to cut it to 320mm et voilá. Accurate as hell with Hades.
When I was rising the power through the hammer spring, I was making some readings and close to the regulator pressure (about 125-130bar) I've noticed that velocity
rise from 270m/s to 298m/s. I heard about regulator creep when the tank is full, but never when the regulator is about to drop.
Please explain this phenomenon, anyone.
Thank you
I wanted to change the caliber of my Leshiy .177, and I bought a .22 Diana Outlaw barrel. Being 12mm OD, only had to cut it to 320mm et voilá. Accurate as hell with Hades.
When I was rising the power through the hammer spring, I was making some readings and close to the regulator pressure (about 125-130bar) I've noticed that velocity
rise from 270m/s to 298m/s. I heard about regulator creep when the tank is full, but never when the regulator is about to drop.
Please explain this phenomenon, anyone.
Thank you