Leshiy Huma Oring

Forums PCP Airguns Leshiy Huma Oring

  • Views : 268
  • Link

    airgunnerca
    Participant
    Member

    My Leshiy is leaking … I found that the Huma oring was damaged … Does anyone know its size? Where can I buy?
    Thanks

    Link

    airgunnerca
    Participant
    Member

    Found it … the size is 18mmx3mm ….
    Thanks Brian

    Link

    Mick-VA
    Participant
    Member

    Thanks for that I need one too.

    Link

    Leon83
    Participant
    Member

    I thought it was 19×2,5mm… 

    Link

    airgunnerca
    Participant
    Member

    “Leon83”I thought it was 19×2,5mm… 

    
I got this info from a Edgun dealer … Brian from EdgunWest …
    Kenny,

    Link

    Leon83
    Participant
    Member

    Thanks, I will buy 18x3mm then. 

    Link

    Mick-VA
    Participant
    Member

    Can you add a link where you found the oring?  My usual place didn’t have them.  Thanks.

    Link

    Leon83
    Participant
    Member

    I live in Poland so metric orings are easy to find. I buy them in local shop… 

    Link

    airgunnerca
    Participant
    Member

    “Mick-VA”Can you add a link where you found the oring?  My usual place didn’t have them.  Thanks.

    
Here the link bud … 
    http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_12_46&products_id=2092
    Kenny,

    Link

    Mick-VA
    Participant
    Member

    Thanks Kenny for the link.  Ordered

    Link

    AirGunShooter
    Participant
    Member

    Just to confirm – that is 18mm ID?

    Link

    airgunnerca
    Participant
    Member

    “Leon83”I thought it was 19×2,5mm… 

    
I received this o-ring (18mmx3mm) today. It DOESN’T work …. ID looks smaller and CS looks thicker than original oring …
    Is it 19mmx2.5mm?
    Picture: Original Oring (Bottom) & 18mmx3mm (Top) … They looks different …

    Link

    airgunnerca
    Participant
    Member

    “Leon83”I thought it was 19×2,5mm… 

    I think you are right … 
I measured by myself  19.68mmx2.5mm so I ordered both 19.5mmx2.5mm & 19mmx2.5mm … I will let you guys know when I get them … Hope it works …
    Kenny,

    Link

    airgunnerca
    Participant
    Member

    “Leon83”I thought it was 19×2,5mm… 

    
Yes, the guy who is owner of HUMA regulators company told me the size is 19×2,5 …. 
    Kenny,

    Link

    Leon83
    Participant
    Member

    I did not follow this thread and just today I tried to exchange the oring and let you guys know that 18×3 is too thick. I will put on 19×2,5 as I wanted in the first place. Thank you for confrmation Kenny.
     

Viewing 15 posts - 1 through 15 (of 15 total)

You must be logged in to reply to this topic.