Anyone here have some experience shooting the 9mm Leshiy? What moderator did you use or modify? Doesn't seem to many people are posting about the 9mm Leshiy barrel but Edgun West sold out a little while ago. I've only seen one video about it and EDgun Leshiy videos shooting squirrels. Trying to get some info on setups for shooting the 9mm out of this small gun.
Leshiy .357/9mm
- Thread starter ckfishdive
- Start date
I use a drilled out Donny FL extended baffle with two extensions to contain the bark a little.
With the Huma reg set to 150 bar and the hst at 27 clicks the speed with the 81 grain JSB is 203mps / 666fps.
At this power level the Leshiy bucks like a mule but is manageable from a heavy sandbag, when I do my part it groups under a MOA at 100 meters.
With the Huma reg set to 150 bar and the hst at 27 clicks the speed with the 81 grain JSB is 203mps / 666fps.
At this power level the Leshiy bucks like a mule but is manageable from a heavy sandbag, when I do my part it groups under a MOA at 100 meters.
Upvote 0
Shooting 666 fps with an 80 grain pellet, and shooting sub MOA at 109 yards. That is some serious holdover- calculating. It was a 4 dot holdover to get to 80 yards with a Cricket shooting at low 800 fps.
Upvote 0
With a 50 meter zero its roughly a 7 mil holdover at 100 meters, that is indeed a lot compared to my Impact with .22 and .25 slugs.
I did upgrade the Vortex 2-10 btw for a Discovery ED 4-16 with a 0.25 mil tree reticle so that all the holdovers can be done without touching the turrets.
I did upgrade the Vortex 2-10 btw for a Discovery ED 4-16 with a 0.25 mil tree reticle so that all the holdovers can be done without touching the turrets.
Upvote 0
Thanks for the info, how many shots are you getting with the reg set at 150? I'm wondering if an extra tube would help.
Upvote 0