Leaking Maruader?

Forums PCP Airguns Leaking Maruader?

  • Views : 392
  • Link

    Todd_Bobcat
    Participant
    Member

    My .177 Maruader is leaking out the little hole in front of the pressure gauge. What is the problem?

    Thanks in advance guys
    Todd

    Link

    Brian10956
    Participant
    Member

    I’m thinking it’s the oring on the guage port ( the thing in Air tank that guage adapter screws into)

    Link

    Todd_Bobcat
    Participant
    Member

    Brian

    You might be right. It looks pretty smashed and ragged. When i took the gauge off, it was really tight.

    Todd

    Link

    Wizard
    Participant
    Member

    I had that same air leak which is cause by damaged O-rings. The cutouts for the gage opening and the trigger area had rough edges from the stamping on my Marauder. I used a small rat tail file to remove the burrs and used a 1″  1200 grit honing brush to polish everything out. No more leaks.
     

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.