I am not sure what you mean by this. You can arm and disarm the unit with the app. Is that what you mean?
Upvote 0
LabRadar - New firmware
- Thread starter txrpls
- Start date
Not sure I follow. You can arm the device now. Are you wanting to be able to turn it on with the iPad?"Strever"Labradar needs the power blue light on and the ipad in last shot mode will be able to make it live or not
and watching each shot info on the bigger screen is kinda neat
Upvote 0
the ipad does arm it in the last shot mode and you see each shot there after on the ipad
but the Labradar has to be unarmed with the blue light on
and the fonts are funky
but the Labradar has to be unarmed with the blue light on
and the fonts are funky
Upvote 0
Here's my first run using JSB 44.75 on my Impact .30 with the supressor off. I did a run using Predator Poly Mags 44.75 and they showed about 20 fps slower. I was using my exactly 40 yd range (tree), so some velocities showed and some stopped at the 40 yards tree.
I forgot to turn on my iPhone for the other rundown view and info.
I thought the whole setup was easier than I expected.
I forgot to turn on my iPhone for the other rundown view and info.
I thought the whole setup was easier than I expected.
Upvote 0
Update yesterday to fix fonts issue. I can't test because I had to go to the beach with grandkids
Upvote 0
what can we do to fix the fonts ?
"txrpls"Update yesterday to fix fonts issue. I can't test because I had to go to the beach with grandkids
Upvote 0
There was an update in the App store"Strever"what can we do to fix the fonts ?
"txrpls"Update yesterday to fix fonts issue. I can't test because I had to go to the beach with grandkids
Upvote 0
i sent an email tue eve to customer support about the big font
i wonder if we are the only ones working with the ipad so far ?
i had to bring my ipad in from the garage to get the update and the font is fine now
need to play with it today to see if the ipad Labradar app will stop timing out now
i wonder if we are the only ones working with the ipad so far ?
i had to bring my ipad in from the garage to get the update and the font is fine now
need to play with it today to see if the ipad Labradar app will stop timing out now
Upvote 0
Do you mean timing out between iPad and LabRadar? If so there is a setting on the iPad that will stop it from going to sleep. I don't have the timing issue on mine, but I have my iPad set where I have to manually turn it off.
Upvote 0
the App quits/turns off if i take too long between shots, will see if that is fixed later today
Upvote 0
Set your five ranges for 35 yards and less. I have mine set at 15-20-25-30-35. You can then use ChairGun to calculate your BC. Looking good!
Upvote 0
Another session today with the .30 Impact and the LabRadar. I tried to set it up today with the DonnyFL Ronin on the Impact, but the LabRadar airgun microphone couldn't pick it up at 6". Took it off and all was fine. Here's a series shot on an uphill incline, unlubed pellets, and also when the pressure was at refill. My Impact is set up with a regulated 150 bar and here the tank was below 140... so below the 840 FPS it normally shoots at. I'm very happy with the LabRadar, and the way it lets me checks different aspects of my shooting.
Upvote 0
I have a KOI on my impact .25, and the microphone picks it up fine. I do keep it within about three inches and slightly behind the microphone.
I am also having the disconnect problem with the app after the last app update.
Upvote 0
While I'm having a tremendous amount of trouble installing the new firmware and getting my radar to talk to my iPhone 6s, I did notice (quite by accident) that - if you swipe your finger left to right on the app, you can change your settings.
ft,yd,m / fps,yps,mph,m/s,km/h / gram,grain / joule,FT-LBF
ft,yd,m / fps,yps,mph,m/s,km/h / gram,grain / joule,FT-LBF
Upvote 0
I've found that if I wait until the string is complete, and stored on the LabRadar's SD card, it transfers via bluetooth easily to my iPhone X. Also... the orange ARM tab displayed on the lower part of the iPhone screen is much easier to activate than using the button on the LabRadar.
Upvote 0