found shouldering this rifle a real pain in the neck, had to stoop my neck to get a good sight picture. So i came up with this DIY remedy. Used two camera mounts a filed down scope rail and a couple of brass plates to make an adjustable butt pad. The pad hold rock solid and i now shoot from a much more upright stance. Originally i cut down a scope mount but just too much messing around, the camera mounts come pre drilled and threaded. May look a little strange compared to products on the market but does the job and also sets back the rubber 
butt from the stock a little more which also helps.
Kral puncher adjustable butt pad
- Thread starter paulsteve
- Start date
Should give this a try hes on facebook as target healing est 2017 great guy to deal with has em for krals,impacts and a whole bunch of rifles and diff colors combos also does hamters and all sorts of things (not affiliated)
Upvote 0
Great idea. Shouldering was the only thing I didn't like about my PB. I have some aluminum, picatinny rail and some low scope mounts. +1 to ya!
Upvote 0
Here it is. I got tired of polishing the Alum so not as shiny as yours but it will get the job done. MUCH nicer to shoulder. Thanks for the idea!
Upvote 0
nice work, the polishing is a pain i agree. Im thinking of remaking mine in aluminium the weight of the brass is too much. Think ill do it in aluminium ill be using 8mm plate and ill drill multiple holes in the plate to further lighten it. My scope rail was picatinny but because i used camera mounts i had to file it smooth. If i space the drilled holes in the aluminium plate i can use the holes for horizontal adjustment. When ive finished the adjustable butt MK 2 ill post. Thanks again for the post.
Upvote 0