Kral new gun?
- Thread starter Fongy18
- Start date
I have a brand new Kral Puncher Nemesis [aka Knight] and it is an awesome rifle!
The kit/version that I received was set up in .22 cal, but also included a .25 cal barrel and pellet probe.
Sam -
The kit/version that I received was set up in .22 cal, but also included a .25 cal barrel and pellet probe.
Sam -
Upvote 0
Not sure why the name change. In Turkey shops still selling it as Nemesis. Here it comes with 3 barrels including .177.
Upvote 0
There are a few Krals I'd like to see over here. Ive read good things about the NP02 in the UK and the Rambo looks like it be a fun gun.
Upvote 0
Yeah, the different 'nickname' is a bit confusing to me too..
Kral Arms: "Knight S"
https://kralarms.com/en/urun/puncher-knight-s/
Krale: "Nemesis"
https://www.krale.shop/nl/kral-arms-puncher-nemesis-synthetic.html
But, if you look at the rifle in the photo from Kral Arms [The manufacturer]
The name on the rifle still says "Nemesis" - Not Knight.
I tried and Tried and TRIED to get in touch with someone at Kral Arms to get info on the gun,
as well as info on a few other accessories that they make, but nope.. They don't respond..
Luckily, Krale [In the Netherlands] stocks and sells Kral guns/accessories,
so I talked to them, ordered mine, and it was here [New York] in just a few days..
It is cool that in Turkey, and in South Africa [from a few videos I saw]
that the kit offers all 3 barrel sizes. I didn't get the .177 option [via Krale]
If/When these are available in the US, I have no clue which way they'll go..
2 calibers is great, but 3 is even better. Not that I'd ever use the .177 cal version.
Also - These rifles are Very Powerful!
On the lowest power setting, in .22 cal, I have to use Heavy pellets.
18 grain / 21 grain. Anything lighter, and the speeds are way too fast,
the pellets destabilize, and aren't accurate at all..
Adjusting the power setting any higher would probably only be good for extremely heavy .22 rounds
or, for the .25 cal setup, where extra power would obviously be needed.
Sam -
Kral Arms: "Knight S"
https://kralarms.com/en/urun/puncher-knight-s/
Krale: "Nemesis"
https://www.krale.shop/nl/kral-arms-puncher-nemesis-synthetic.html
But, if you look at the rifle in the photo from Kral Arms [The manufacturer]
The name on the rifle still says "Nemesis" - Not Knight.
I tried and Tried and TRIED to get in touch with someone at Kral Arms to get info on the gun,
as well as info on a few other accessories that they make, but nope.. They don't respond..
Luckily, Krale [In the Netherlands] stocks and sells Kral guns/accessories,
so I talked to them, ordered mine, and it was here [New York] in just a few days..
It is cool that in Turkey, and in South Africa [from a few videos I saw]
that the kit offers all 3 barrel sizes. I didn't get the .177 option [via Krale]
If/When these are available in the US, I have no clue which way they'll go..
2 calibers is great, but 3 is even better. Not that I'd ever use the .177 cal version.
Also - These rifles are Very Powerful!
On the lowest power setting, in .22 cal, I have to use Heavy pellets.
18 grain / 21 grain. Anything lighter, and the speeds are way too fast,
the pellets destabilize, and aren't accurate at all..
Adjusting the power setting any higher would probably only be good for extremely heavy .22 rounds
or, for the .25 cal setup, where extra power would obviously be needed.
Sam -
Upvote 0
I thought that the Kral NP-01 was a pretty killer pistol/rifle combo too!
https://www.krale.shop/nl/kral-arms-puncher-np-01-synthetic.html#all_specifications
Multiple caliber options and can be used in pistol or rifle form.
Sam -
https://www.krale.shop/nl/kral-arms-puncher-np-01-synthetic.html#all_specifications
Multiple caliber options and can be used in pistol or rifle form.
Sam -
Upvote 0
And the NP-04 Auto... Killer little gun!
These have bigger tanks, and more air is more fun!
https://kralarms.com/en/urun/puncher-np-04-auto/
Sam -
These have bigger tanks, and more air is more fun!
https://kralarms.com/en/urun/puncher-np-04-auto/
Sam -
Upvote 0
DirtyDovi Found the gun on there site but no kit, may I ask the cost of it ? Also do you know if the puncher breaker mags work in it also ? Thankyou Darell
Upvote 0
Darell,
The link to Krale [posted above] actually is for the 'kit'.
$704.90 + Shipping + a possible fee for out of country credit card transaction..
Krale does a Great job of packaging and padding the contents.
They use UPS to ship, and like I said, delivery only takes a few days!!
This is what shows up in the box.. The case, gun, bipod/fore-grip,
2nd barrel [.22 installed and extra .25] The white box contents:
Spare o-rings, filler probe connector, allen wrench / probe tool,
and Four magazines. 2 for the .22 and 2 for the .25.
And YES. Kral Puncher Breaker mags DO work in the Nemesis!
This is my bill of sale / receipt if that helps:
And here is the start of my Kral collection so far.
The 1st thing that I did was interchange both .22 magazines
from the PB to the Nem, and the Nem to the PB. All work perfectly.
*Thumbs Up*
Sam -
The link to Krale [posted above] actually is for the 'kit'.
$704.90 + Shipping + a possible fee for out of country credit card transaction..
Krale does a Great job of packaging and padding the contents.
They use UPS to ship, and like I said, delivery only takes a few days!!
This is what shows up in the box.. The case, gun, bipod/fore-grip,
2nd barrel [.22 installed and extra .25] The white box contents:
Spare o-rings, filler probe connector, allen wrench / probe tool,
and Four magazines. 2 for the .22 and 2 for the .25.
And YES. Kral Puncher Breaker mags DO work in the Nemesis!
This is my bill of sale / receipt if that helps:
And here is the start of my Kral collection so far.
The 1st thing that I did was interchange both .22 magazines
from the PB to the Nem, and the Nem to the PB. All work perfectly.
*Thumbs Up*
Sam -
Upvote 0
I saw it on pyramid air website they have them, but not sure if you get 2 barrel and 4 mag, I was thinking about getting one too maybe I might have to do what you did to get the set. Update on how it shoot...
Upvote 0
On the page w/ the Nemesis up top,
you can view a few different tabs - *Specifications, etc..
There you'll see more info, and what's included..
*Arrow, and Two Circles.
The staff at Krale are as top notch as they get!
[email protected] is their e-mail address, and I always spoke with Chris.
He was fantastic to deal with. Extremely informative and helpful!
They do require 'proof of identification', so, to order,
you'll need to send them a photo of your drivers licence..
I asked Chris if I could blur out my actual DL #, address, etc..
Yes. No problem at all.
They just need to see it, your photo, and your name and birth-date.
I e-mailed him the photo so he'd have it on record.
Then when completing the actual order, there's a page to upload it..
So I uploaded it there too.
Everything was super easy - Other than a few errors caused my my credit card company.
They flagged for fraudulent activity, so I just had to text them and verify that Yes, it was Me,
and after that, my order went right through.
This company is Highly Recommend for anyone wondering, or hesitant...
I would and will order from them again without hesitation!
Sam -
you can view a few different tabs - *Specifications, etc..
There you'll see more info, and what's included..
*Arrow, and Two Circles.
The staff at Krale are as top notch as they get!
[email protected] is their e-mail address, and I always spoke with Chris.
He was fantastic to deal with. Extremely informative and helpful!
They do require 'proof of identification', so, to order,
you'll need to send them a photo of your drivers licence..
I asked Chris if I could blur out my actual DL #, address, etc..
Yes. No problem at all.
They just need to see it, your photo, and your name and birth-date.
I e-mailed him the photo so he'd have it on record.
Then when completing the actual order, there's a page to upload it..
So I uploaded it there too.
Everything was super easy - Other than a few errors caused my my credit card company.
They flagged for fraudulent activity, so I just had to text them and verify that Yes, it was Me,
and after that, my order went right through.
This company is Highly Recommend for anyone wondering, or hesitant...
I would and will order from them again without hesitation!
Sam -
Upvote 0
Ahhh! I didn't know that Pyramid Air had them on their site!
Yup, I just looked, and they have them listed as "Pre-Order".
I read countless posts from people asking when these would be available in the US,
and no one seemed to have a clue.. That said, I just went straight to Krale.
If you search Krale, they are very highly recommended by a Lot of people.
I order from PA quite a bit, since they're in OH and I'm in NY.
They usually take a few days to process - then ship - then I wait..
It takes almost a week for me to get my orders..
With Krale IN THE NETHERLANDS - It only takes a Few Days! hahaha
Mind blowing and all 100% trackable - real time - using UPS's website.
I got text updates sent to my phone too.. Super cool.
Sam -
Upvote 0
Thanks for the info ! I like that extendable butt piece that some of them come with too . Darell
Upvote 0
Sorry sam what I meant to say was they listened as pre order. I was looking around to see if they have anything good because I was thinking about getting the new fx wildcat mk2 but the kral always draw me back
Upvote 0
Guys,
The day that my Nemesis arrived, my only vehicle also broke down..
I actually put the brand-new kit up for grabs here on the Member Classifieds page,
because I needed to get my ride back up and running, but, I received too many annoying / insulting offers..
That said, I decided just to keep it, but since then, I've only shot it a few times..
It's winter, so, I'm shooting inside - About 10 yards max distance unfortunately..
I tried 3 types of pellets.. Crossman Premier hollow points 14 grain, JSB 18.13 grain, and H&N 21 grain
On the very lowest power setting, this thing just sprayed the light pellets like a shotgun / birdshot patter. lol
It is way to fast/powerful in .22 cal for those.. Then I tried the JSBs, and the groups tightened right up!
Unfortunately, 3 tins of JSBs - Damn near all of mine are complete garbage..
Bent / deformed skirts, and the wall thicknesses are inconsistent too, so, sighting in was a royal pain..
The JSBs have pretty much just been flyer after flyer.. Very hard to judge the point of impacts.. Pretty lame..
The H&N pellets worked the absolute best! So, the heavier the better with this gun!
That was a quick group - using a really cheap CLife scope/laser combo..
I ran out of vertical elevation clicks, so, I was forced to use like 3-4 mils of hold-over.
I put my Discovery 6-24x50 scope on it, and tried that.. Nope.. Same deal..
I needed to use about 3.5 mils hold-over.. I was going crazy. Well, crazIER.
Then I pestered Hajimoto - He's a great guy, member here, and on Youtube..
I ran my issue by him, and he suggested I try FX's No Limits scope rings..
They'll lock the scope down like usual, but, they have two additional side-bolts..
Loosen them, tilt the rear of the scope up, and tighten them back down..
This literally re-positioned the scope to where not only I could zero normally, but,
it about centered my turret, so, I have a bunch of up and down clicks now..
So - I Highly Recommend those scope rings! For super short / super long distance anyways..
Regular distances like 30-50-75, probably 100 yards, they may not be needed, but no clue..
Anyways.. My master plan.. Tune the gun! But I couldn't because I didn't have a chronograph..
Well, screw it, I still don't have a working vehicle, so might as well buy the chrony..
I ordered a ProChrono-DLX, it got here, and I was all excited to get things dialed in..
Finally got the chrono bluetooth'd to my computer and phone . . . and . . . .
Nothing.. It wouldn't work at all.. Apparently they NEED the indoor-lighting-kit,
and I couldn't get it because it was out of stock at the time.. *Face Palm* *Sigh*
That has been ordered, and is currently in route.. Amazon Prime 2 day shipping.. Right?
No.... Monday is a holiday - So - I / we get to wait even longer.. Go figure right?!
When the chrono gets here, I'll be De-Tuning the power down to the point that in .22,
it will shoot the light weight Crossman Premier pellets..
Why? Well, because they're only $7 bux per tin of 500, and they shoot amazing!
They're cleaner, more uniform, and predictable - compared to the JSBs costing almost 4 x as much..
If you look at all of those, they are pellet in/on pellet in/on pellet..
That Is Pellet Stacking! Those were shot out of my Kral Puncher Breaker .22
I can Expect this type of accuracy from that gun, and from the Crosman Premier pellets..
So, I'd like to see the same type of accuracy from them out of the Nemesis too!
I just have to get it to shoot a lot slower and with less power/volocity first..
*Fingers Crossed*
Sam -
The day that my Nemesis arrived, my only vehicle also broke down..
I actually put the brand-new kit up for grabs here on the Member Classifieds page,
because I needed to get my ride back up and running, but, I received too many annoying / insulting offers..
That said, I decided just to keep it, but since then, I've only shot it a few times..
It's winter, so, I'm shooting inside - About 10 yards max distance unfortunately..
I tried 3 types of pellets.. Crossman Premier hollow points 14 grain, JSB 18.13 grain, and H&N 21 grain
On the very lowest power setting, this thing just sprayed the light pellets like a shotgun / birdshot patter. lol
It is way to fast/powerful in .22 cal for those.. Then I tried the JSBs, and the groups tightened right up!
Unfortunately, 3 tins of JSBs - Damn near all of mine are complete garbage..
Bent / deformed skirts, and the wall thicknesses are inconsistent too, so, sighting in was a royal pain..
The JSBs have pretty much just been flyer after flyer.. Very hard to judge the point of impacts.. Pretty lame..
The H&N pellets worked the absolute best! So, the heavier the better with this gun!
That was a quick group - using a really cheap CLife scope/laser combo..
I ran out of vertical elevation clicks, so, I was forced to use like 3-4 mils of hold-over.
I put my Discovery 6-24x50 scope on it, and tried that.. Nope.. Same deal..
I needed to use about 3.5 mils hold-over.. I was going crazy. Well, crazIER.
Then I pestered Hajimoto - He's a great guy, member here, and on Youtube..
I ran my issue by him, and he suggested I try FX's No Limits scope rings..
They'll lock the scope down like usual, but, they have two additional side-bolts..
Loosen them, tilt the rear of the scope up, and tighten them back down..
This literally re-positioned the scope to where not only I could zero normally, but,
it about centered my turret, so, I have a bunch of up and down clicks now..
So - I Highly Recommend those scope rings! For super short / super long distance anyways..
Regular distances like 30-50-75, probably 100 yards, they may not be needed, but no clue..
Anyways.. My master plan.. Tune the gun! But I couldn't because I didn't have a chronograph..
Well, screw it, I still don't have a working vehicle, so might as well buy the chrony..
I ordered a ProChrono-DLX, it got here, and I was all excited to get things dialed in..
Finally got the chrono bluetooth'd to my computer and phone . . . and . . . .
Nothing.. It wouldn't work at all.. Apparently they NEED the indoor-lighting-kit,
and I couldn't get it because it was out of stock at the time.. *Face Palm* *Sigh*
That has been ordered, and is currently in route.. Amazon Prime 2 day shipping.. Right?
No.... Monday is a holiday - So - I / we get to wait even longer.. Go figure right?!
When the chrono gets here, I'll be De-Tuning the power down to the point that in .22,
it will shoot the light weight Crossman Premier pellets..
Why? Well, because they're only $7 bux per tin of 500, and they shoot amazing!
They're cleaner, more uniform, and predictable - compared to the JSBs costing almost 4 x as much..
If you look at all of those, they are pellet in/on pellet in/on pellet..
That Is Pellet Stacking! Those were shot out of my Kral Puncher Breaker .22
I can Expect this type of accuracy from that gun, and from the Crosman Premier pellets..
So, I'd like to see the same type of accuracy from them out of the Nemesis too!
I just have to get it to shoot a lot slower and with less power/volocity first..
*Fingers Crossed*
Sam -
Upvote 0
No worries, and yeah..
All this time later, and no place in the US has them yet, or seems to have a set date when they'll be here..
The FX Wildcat mk1 and mk2 are both Very Nice rifles! I am a HUGE fan of bullpups, so, I definitely looked at those too!
I've been shooting since I was 12-13 and I'm 38 now.. As soon as I could legally buy my own rifles, I started stocking up..
Ruger 10/22s were always my favorite, and I converted a bunch of them into bullpups..
Anyways, I'm stocking up on as many bullpup PCPs as I can afford now.. Not one after another, but, when I can..
I had saved and saved and saved, and intended on ordering an FX Impact, extra high-cap mags, etc..
Then I had a moment of clarity.. I could spend all that money, and have ONE gun, or...
I could spend it on SEVERAL guns, and with the $ left over, get a compressor and BIG carbon fiber scba tank...
And that's exactly what I did.
I got a Hatsan Gladius, Kral Puncher Breaker, Yong Heng compressor, and 88 cubic inch cf scba tank.
And I absolutely LOVE the Puncher Breaker. It's just so small and ridiculously accurate..
All of that stuff, and probably still spent less than if I had gone with the FX Impact.
Hey, have you checked out the new Dreamline FX series of rifles yet?
They might also have a Great option for you..
The Dream-Pup version. It is just like the Wildcat, but, I noticed that there are a lot more shots per magazine!
That's a huge selling point for me personally.. And, with the Dreamline series, everything is interchangeable..
The Nemesis though - same mags as the Puncher Breaker - I already had, Lots of on-board air,
and the adjustability is fantastic. Adjustable buttpad and adjustable cheek riser.. I couldn't pass it up.
Sam -
Upvote 0
I'll second the comments about Krale in Holland, they provide an excellent service. I recently got a scope from them.
If anyone is looking for a wide range of power in their rifle the new Kral Space might be of interest. It is the one I am waiting for. The .22 will have a minimum power setting of 14ft/lbs and maximum of 50ft/lbs. In .25 it will max out at about 64ft/lbs. It is due for release here in Turkey in March/April.
If anyone is looking for a wide range of power in their rifle the new Kral Space might be of interest. It is the one I am waiting for. The .22 will have a minimum power setting of 14ft/lbs and maximum of 50ft/lbs. In .25 it will max out at about 64ft/lbs. It is due for release here in Turkey in March/April.
Upvote 0