Kalibrgun cricket. Silencer damage

Forums PCP Airguns Kalibrgun cricket. Silencer damage

  • Views : 378
  • Link

    928487381
    Participant
    Member

    I have a tragedy, my god, who can tell me where to buy kalibrgun cricket.25 silencer

    Link

    Coldair
    Participant
    Member

    Looks like you can fix that, just flatten the cone edges, drill out the center holes a little larger and use a little high strength epoxy to attach the cones to the tube sleeves and reinstall them when dried. Sand the edges a little if it doesn't fit properly. If there is space and it is not tight when you screw in the end cap then add a thin faucet washer to keep the baffles firm inside the shroud. You can find parts at your local hardware store usually made out of brass to replace them if you need to.

    CA

    Link

    928487381
    Participant
    Member

    My hands-on ability is very bad, I still want to be able to buy a new, you know where to buy?

    Link

    jfvhpilot
    Participant
    Member

    Donny sells them, as long as your shroud is threaded. I have the Sumo on mine and it works very well. 

    Link

    zx10wall
    Participant
    Member

    Send it to John Hagan. He can replace or repair those baffles. While he had it, you could get a threaded end can for an added moderator if you’d like. 

    [email protected]

    Link

    Coldair
    Participant
    Member

    Those are very good options for you to fix your problem maybe make it even quieter but…

    If you need direct replacement contact Charley at https://www.georgiaairguns.net/

    He has parts for the guns.

    CA

     

    Link

    Coldair
    Participant
    Member

    Hold on, how can you NOT be good with your hands when you can make your own pellet making dies and your own JSB pellets?

    Just wondering…

    CA

    Link

    928487381
    Participant
    Member

    My mold is purchased, I really want to repair the silencer myself, but I know I can't do it, I just tried it.

    Link

    Coldair
    Participant
    Member

    You have the 3 solution options posted. Assuming you are from Taiwan or China?

    Do you have any restrictions buying and receiving air gun parts or items from the United States?

    CA

    Link

    928487381
    Participant
    Member

    I have a way to buy anything, I just don't know where to buy it.

    Link

    Coldair
    Participant
    Member

    Georgia Airguns ask for Charlie

    https://www.georgiaairguns.net/

    He has the replacement parts you need.

     

    CA

    Link

    928487381
    Participant
    Member

    I have sent an email, but he did not reply. Do you have a silencer?

    Link

    Coldair
    Participant
    Member

    Yes but it is not for sale, it is on my Cricket. I would suggest you post on the Member Classifieds section

    WTB- Shroud for 25 Cricket. You will probably be required to send payment through Paypal.

    Or if you can't get in contact with Charlie at Georgia Airguns then you can contact the others mentioned

    above. Lookup DonnyFl online to get his info.

    It is rather suspicious you can't seem to get in contact with Charlie.

     

    CA

    Link

    928487381
    Participant
    Member

    Thank you very much for your help, I have already posted

    Link

    Coldair
    Participant
    Member

    Just so you know, between $80.00 USD to $200.00 USD maximum would be typical average reasonable prices for what you are looking for.

    Plus shipping fees.

    CA

    Link

    aldea6
    Participant
    Member

    Hi, how did you attach your silencer on your cricket , directly on the barrel or with an adapter at the end of the shroud?

    I did this modification a few months ago . I remove the cap at the end of the shroud by heating with a torch to soften the époxy glue, and turning the cap at the same time. Clean the Inside of the shroud ( where the cap was) with sandpaper. Then you have to ask a good turner to make an aluminium adapter on a lathe, one side must fit very snugly in the shroud , the other end must be threaded 1/2 UNF to accept  most of the silencers.

    I put a Huggett moderator on my .25 Cricket ; it works fine.

    Aldea6

    Link

    milacik
    Participant
    Member

    curious what cause such a damage. any input on that?

    Link

    aldea6
    Participant
    Member

    Really don't know. Such distorsion on the spacer tube is very  amazing . No pellet could  cause this , I think.

    Link

    zx10wall
    Participant
    Member

    A pellet or slug could definitely cause this. Looks like a projectile clipped and forced that coned baffle into the downstream side tube distorting it as well. I could easily see it happening.  

    • This reply was modified 6 days ago by zx10wall.
    Link

    ShootistX
    Participant
    Member

    Gee, " Why does that look like he tried to use that Silencer on a .22 rimfire? Anyone? Let me think. I believe that Kricket uses a 1/2 unf. How shocking that it could fit right on a commonly used rimfire thread. Hey, don't shoot the messenger. I'm not saying that's what he did. But it sure as hell looks like it. The only thing missing here is powder residue.

    Or is it?

Viewing 20 posts - 1 through 20 (of 21 total)

You must be logged in to reply to this topic.