To CHUCK, for all his patience in helping me with my Wildcat 30. I’ve had it down for this past month and a half, mainly because I decided to take it apart and “prep” it for a Huma reg install. Another main motive, is I wanted to disassemble that thing and learn all about it.
Definately pulled some hairs and have scars to show, both on me and the gun, but it was well worth the “no pain, no gain” effort. I can honestly say I know a lot about that rifle, and should any O ring give out, I can reseal that thing in my sleep.
With that awesome Huma reg, I’m at an average speed of 922, for 28 shots using the Vortex 44.75 grainers, and hardly any turns on the hammer screw setting. I’m a happy camper.
Heres 7 shots at 50.5 yards at the end of my sight in, shooting at a 1” diameter splatterburst bulls-
There’s still a lot more to final tuning that’s required on this for the best accuracy, and I’m gonna leave the master alone with that one, and figure it out myself. I’ve caused him to lose his voice one too many times, lol.
Thanks again, buddy.
Definately pulled some hairs and have scars to show, both on me and the gun, but it was well worth the “no pain, no gain” effort. I can honestly say I know a lot about that rifle, and should any O ring give out, I can reseal that thing in my sleep.
With that awesome Huma reg, I’m at an average speed of 922, for 28 shots using the Vortex 44.75 grainers, and hardly any turns on the hammer screw setting. I’m a happy camper.
Heres 7 shots at 50.5 yards at the end of my sight in, shooting at a 1” diameter splatterburst bulls-
There’s still a lot more to final tuning that’s required on this for the best accuracy, and I’m gonna leave the master alone with that one, and figure it out myself. I’ve caused him to lose his voice one too many times, lol.
Thanks again, buddy.
