Just ordered the Vulcan in 25

I just received my Vulcan.25 with Aeon 6x24x50 trajectory scope and a Joe B. tiger shark 74cuft air tank also a Shoebox compressor from Tom Kaye and I couldn't be happier right now. I went from a Disco.22 to the Vulcan and this thing is a serious power house.

Where can I find all the o-rings for the Vulcan.25 ? Just in case I need to swap them out. When I first fired it the mag jammed and I made the mistake of jiggling the bolt but ended up pushing all the pellets into the barrel. After removing all the pellets I dried fired the gun and blew the breech seal o-ring out it took awhile but I finally seated the breech seal o-ring back in place and the gun fires fine now 

"TKA87"Where can I find all the o-rings for the Vulcan.25 ? Just in case I need to swap them out. When I first fired it the mag jammed and I made the mistake of jiggling the bolt but ended up pushing all the pellets into the barrel. After removing all the pellets I dried fired the gun and blew the breech seal o-ring out it took awhile but I finally seated the breech seal o-ring back in place and the gun fires fine now

Click to expand...

Check out TAG forum under the Vulcan board...very first post has them all listed.

Hi ok my fault, not intended to confuse.

See my post dated 16th February 2016.

When looking at your video clips on you tube site came up with other videos in a collection . One of which NOT made by you showed a joke video of various shooters discharging guns in an usafe way.eg leaning a loaded gun against a fence , gun falls over and bang etc etc. All funny and feel sure these were training videos of not what to do. Been posted on the web many times. Somehow they got linked into your collection. As I earlier posted to Frank his videos were and are very good.

Trust this now cleared up.

safe shooting

Thanks clgraham82 I found them. The Vulcan is my go to gun now and with the new CB tank and Shoebox compressor I'll be needing to order some more JSB.25 again real soon.

Does anyone know where the bleed screw on my new .25 Vulcan is located? In the YouTube videos I watched it was at the base of the air tube but on mine there is no bleed screw located there.

I almost bought my Vulcan.25 from Tony but ended up buying mine from Joe Brancato because it was a couple hundred cheaper plus I wanted a CB tank and an Aeon scope but when I emailed Tony his response was quick and he was a total gentlemen I'll probably end up ordering a fully tuned Condor SS or Kricket from Tony on my next purchase he has a really good reputation in the airgun industry.

I just realized my last post sounded almost like I was advertising but that was totally not my intention my apologies.

Wicked little riffle especially with a silencer. Wicked it shall be my friend. Enjoy.....