JSAR RAPTOR

Yo Haji

I also got the Mini as a .22 slugger. Mine is the Angel Cruz version...

That’s a very impressive string . 100 shots on regulation........ colour me MORE impressed. Surely this valve can put out some big numbers .



. lbcPSi , the gun can make up to 150 FPE . Slinging the heavy MKII will not be a problem at over 950 fps . And I beleive the fill to be 4500 psi. U

Click to expand...

Well, the full sized Raptor can make 150fpe in .30 but the Mini has a smaller plenum 60cc VS 85cc (I think), so it'll probably be less than the 80fpe the Raptor.25 is capable of.

The 890fps with the 25.4gr is still around 45fpe..like the 34gr at 770ish.

Just curious what the approximate max fpe the Mini might generate in .25.

I am sure it can shoot 34 grains at minimum 900fps

Nice tight shot string for the Mini Raptor Travis, that was shot tethered, correct?

That was not tethered. I believe that was a full 4500psi fill. 

If I were to place a bet on max FPE on the Raptor mini in .25 cal . I’d put it at 90 fpe at 170 bar with the 22” barrel . Up the pressure and add barrel length and the power will go up of course . 

Mini only has a 16.5 inch barrel. Full size Raptor has the 22 inch. I think.

What are the differences between going with a slug barrel vs one for pellets (JSB)

Thx

Dan

That is correct 16.5 for mini and about 70 fpe max and 22 for standard and around 100fpe max in .25 cal. maybe a tad more Ive never pushed it that hard really.

What are the differences between going with a slug barrel vs one for pellets (JSB)

Thx

Dan

Click to expand...

The 25 cal uses same barrel for pellets or bullets no change necessary

That was a full string from a 4500 psi fill not tethered. I’m off today but tomorrow I will crank it up and throw some heat for you guys.

Click to expand...

Thx for that! The 100 shot string was impressive. It would be really cool to see a 50-60 shot string around 65-70fpe (or more) with 34grs.

That was a full string from a 4500 psi fill not tethered. I’m off today but tomorrow I will crank it up and throw some heat for you guys.

Click to expand...

Thx for that! The 100 shot string was impressive. It would be really cool to see a 50-60 shot string around 65-70fpe (or more) with 34grs.

Click to expand...

Ill run a high power string tomorrow and post. 

That was a full string from a 4500 psi fill not tethered. I’m off today but tomorrow I will crank it up and throw some heat for you guys.

Click to expand...

Thx for that! The 100 shot string was impressive. It would be really cool to see a 50-60 shot string around 65-70fpe (or more) with 34grs.

Click to expand...

Ill run a high power string tomorrow and post.

Click to expand...

and here we are "tomorrow" everyone waiting on the results .... 

Thats right. We are waiting

Patience people. Gotta remember different time zones we're on the west coast it's just 7am. Gotta give some time. And no I'm not affiliated with them but JSAR is about 6-7hrs away from me in Oregon.

 made me grin, my first impression was, " hey, that looks like Dillon waiting for his mini Raptor and his Evol"  got varmits to control

 made me grin, my first impression was, " hey, that looks like Dillon waiting for his mini Raptor and his Evol" 

got varmits to control

Click to expand...

Lol yeah I'm basically gunless at the moment waiting for them! I do know my Mini is getting close though so that's exciting

i like it. i like it very much!