ISO Prod Alternative Stock Options

Jump to latest Follow Reply
Simonjello

Simonjello

Member
Jul 6, 2021
36
20
SoCal, United States
Hi Folks!

I’ve been pretty unhappy with the default skeleton stock on my P-Rod and have been looking into alternatives. I’m seeing a lot of us using the RAI adapters with AR stocks (which is pretty expensive). I was wondering if any of you have had any success with other alternatives or have any recommendations.

(I.e. the buck-rail AR adapter/stock combo: looks good and is relatively inexpensive, but I can’t find any reliable customer reviews)

Thanks in advance,

Simonjello
 
There are lots of good reviews of the buck-rail. Decent length thread on GTA is where I first heard of it and decided to get one. It is solid enough and the knockoff magpul stock is a really good copy. Just had to put a little duct tape on the "buffer tube" to tighten the fitment to remove some stock to tube wobble. It uses a long bolt from the stock so it has some structural strength added to the 3d printing. Much better cheek weld than the crosman stock. It is worth it.
 
Upvote 0
I to was on a mission to find an affordable P-rod stock. While I was looking I found a strap on cheek piece from Voodoo Tactical. It was under 15 bucks and free shipping from Amazon. With about 30 minutes of messing with it I ended up with this. Holds 3 mags on the one side. Extra pellets, tools or what ever on opposite side. So happy with it I quit looking for a replacement. 

20210917_093747.1631886810.jpg
20210917_093706.1631886811.jpg

 
Upvote 0
Thank you all for the replies!

The voodoo tactical looks like a great fix with a lot of added utility, however, while it fixes the cheek weld issue, the length of pull on the skeleton stock is still a little too long. With the price point that low, I may as well give it a try.

and thank you for the other suggestions, I will look further into them. I really appreciate your input!






 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu