I heard from another member who wanted to buy a Polish Plenum that the cost was now $405
Is it true? $405
- Thread starter Oreida05
- Start date
It's about $160-170 and 3 months wait. So good luck. You can get the fx power plenum for $175 and way faster imo. Both should have the same power but people claim Michal is more power. Maybe fanboys? Who knows. Unless one actually have both and and tested side by side.
Upvote 0
Thanks for the clarification. I thought $400 sounded crazy
It looks like a long wait no matter which direction I go.
It looks like a long wait no matter which direction I go.
Upvote 0
It took two months and a few days for my plenum from Poland. It was 160 or $170 including shipping. I have been waiting for over three months for my .30 cal pellet probe/feeding pin from FX so you are likely correct it's a long wait either way.
Upvote 0
Why should they have the same power? One is 53 one is 70cc volume. The one with 53 is usually combined with a new weaker hammer spring and different setup on the valve return spring that people have been cutting to add power.
Combined with some easy porting, a bigger valve seat and hammer weight the Michal plenum makes more power at a lower reg pressure than I've seen from the pp. (Hammer weight and bigger valve also included with pp kit)
Upvote 0
I contacted Michal about his plenum and received a email that he has a person in the US and to contact him. Did so and told the price is $ 405,.
Upvote 0
405 was 4 valve housing, plenum and Hammer weight. I emailed Charles in the US asking if you could just buy the plenum. As soon as I hear from him I'll post it
Upvote 0
He told me the same thing also. Charles or chuck told me $400 for him to install or install myself. I just went ahead and bought the fx pp
Upvote 0