Impact valve housing update

Forums PCP Airguns Impact valve housing update

  • Views : 488
  • Link

    AirSupply
    Participant
    Member

    So fx have followed Ernest lead and the Fx stock item is now machined the same as his modification. 
    Explains why later Impacts are getting more velocity at lower reg pressures. 

    Link

    YamahaR1
    Participant
    Member

    How new is your gun?  I am getting my new impact from AOA this Wednesday. Wonder if it will have this new valve housing. 

    Link

    AirSupply
    Participant
    Member

    I’d say it will. I picked this up yesterday but it had been waiting there for me for about a month. I just purchased it as a part. 
    I didn’t know it was different until he handed it to me. 

    Link

    YamahaR1
    Participant
    Member

    Good to know, thanks for the update once I get my impact I’ll take a look and see if it is the same as yours. I’ll post on this thread if it is. 

    Link

    AirSupply
    Participant
    Member

    Great. Would be an easy update for an older Impact also. I’m waiting on one of Ernest’s titanium valve seats and will install them together. 

    Link

    EliteAirgunr
    Participant
    Member

    That means a lot of air going in. I personally have one of Ernest Valve seats and can get my .30 44gn to shoot 860fps at aound 110b. I’m curious how having one over the other or both together effect anything. I know that with the valve seat I am able to get over 65 shots on an accurate shooting .30 cal air rifle. 

    Thanks for posting that!

    Link

    AirSupply
    Participant
    Member

    I think as general rule a larger plenum and a lower regulator pressure can give you FPE with a better ES and SD and shot count. 
    I think milling out the valve housing increase plenum space by about 5cm3. 
     

    Link

    AirSupply
    Participant
    Member

    Your figures are great anyway Elite. I suppose really you’ll get more power or more efficiently not both. I had already drilled out my housing and I got an increase of 15fps with the .25 King Heavies but I’d like to get that with a lower regulator pressure and less HST if possible. It should be a little easier on the internals of the gun also. 

    Link

    aussiegav
    Participant
    Member

    “EliteAirgunr”That means a lot of air going in. I personally have one of Ernest Valve seats and can get my .30 44gn to shoot 860fps at aound 110b. I’m curious how having one over the other or both together effect anything. I know that with the valve seat I am able to get over 65 shots on an accurate shooting .30 cal air rifle. 
    Thanks for posting that!

    
They are great stats. Anyone should be happy with that.You could say they are elite stats.

    Link

    Azycray
    Participant
    Member

    Where can you buy one of these improved valve housings? I went to Ernest’s web site, under construction, and there is no way to place an order. I would also like to get one of his improved valve seats.

    Link

    YamahaR1
    Participant
    Member

    Yeah I would love a new valve seat too. But he told me he was too busy to make them. So I don’t know when they will be available.  

    Link

    AirSupply
    Participant
    Member

    The valve housing pictured above is an FX part not one of Ernest’s. That is now the way the FX factory makes the parts. So just order it from where ever you get your parts. 
    Getting the valve seat isn’t so easy !!!!

     

    Link

    toku58
    Participant
    Member

    I’m ordering one, hope it has the upgraded valve housing?

    Link

    Eyeshot.25
    Participant
    Member

    You can get upgraded valve seats from pomona airgun.

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.