hey all im in uk but watch the youtube when you guys tune impacts and say your maxing out ya hammer spring screw are you just tightening until it stops then back off a tad so wheel still turns or do you loosen until fps drops
impact tuning advice please
- Thread starter dye29
- Start date
Tighten all the way then back it off a quarter turn. Adjust regulator to approximate velocity you’re trying to achieve, shot groups and use the valve adjuster and/or the power wheel to decrease the velocity until accuracy is excellent. Very basic explanation but should get you there! Have a good one!
Stoti
Stoti
Upvote 0
Give him the benefit of the doubt, hes not asking how to remove anti-tamper devices. Hes asking about impact tuning, do you have anything constructive to add YO?
Or just cutesy pictures as a distraction.
Or just cutesy pictures as a distraction.
Upvote 0
Im in Canada do you assume I don't have an FAC too? He doesn't need us to keep him out of jail.
You are making an assumption. (Period)
You are making an assumption. (Period)
Upvote 0
Yo, I think you’ll find it easier to wreak havoc with an IPad. The IPad Pro is especially easy, and has surprisingly good speakers.
Upvote 0
Testing 1 2 3...
When this first worked and I tried to edit to post a reply it disappeared then tried it again then said I had to wait 2 minutes for another post then the first one disappeared and so did the subsequent edit.
When this first worked and I tried to edit to post a reply it disappeared then tried it again then said I had to wait 2 minutes for another post then the first one disappeared and so did the subsequent edit.
Upvote 0
HONESTLY GLEM, I first thought you were shooting your Impact at just under 500fps. That's what I thought when you folks don't need silencers nor shrouds because at sub 500fps they aren't that offensively loud.
Upvote 0
Thanks stoti very helpfull , and for rest of you which part did i ask to increase a sub 12 so now who sounds stupid , i asked a simple question as ive heard several say they max hammer screw out yet when you see there gun the screws half way out
Upvote 0
There are no stupid questions and nobody meant to insult. Mostly a good lot of interesting characters here.
Upvote 0
We do have shrouds but they dont function (air stripper doesn't vent into shroud) My guns are full power and i have a firearms license also. Its honestly not too loud, once you get .22 over 1000fps or .30 shooting hot its got a bark forsure but not obscene.
Ok back on topic, sorry OP.
Upvote 0
I tried buying an FX from a well known gentleman in Canada that was missing bits of that front end like OBVIOUSLY MISSING and didn't buy it because I couldn't believe he received it that way missing front end pieces like that like NAKED UNSHROUDED with a skeletonized stripper exposed like someone stole parts from that gun.
Upvote 0
