Impact Power Plenum .35 caliber

GQ · May 10, 2020

Question are for Fx Airguns ...

The hammer or hammer weight are different in weight for the .35 caliber ?

The hammer spring is stronger or not ?

The ajustment valve spring is différent or not ?

The valve housing and pin have the same diameter compared to the other calibers ?

FX-USA · May 11, 2020

Hi GQ,

A tech would be able to answer all these questions for you if you send them an E-mail at [email protected].

Regards,

FX Airguns Customer Service Support

stoti · May 12, 2020

I was sent a .35 valve housing and valve by accident a while back when I was having problems with my Impact MKII and the housing was way larger than the one for .22/.25/.30. I wouldn't imagine any of the parts from the smaller gun would fit. It's a different beast! Here's a pic of the .35 valve housing with my .25 valve pin sliding right through it. Have a good one. Stoti

1589295044_10775750875ebab7c4246de9.07669067.jpg

Broken_WV_Guy · May 18, 2020

Does the larger valve prevent the smaller calibers from working with the .35 cal?

GQ · May 18, 2020

I was sent a .35 valve housing and valve by accident a while back when I was having problems with my Impact MKII and the housing was way larger than the one for .22/.25/.30. I wouldn't imagine any of the parts from the smaller gun would fit. It's a different beast! Here's a pic of the .35 valve housing with my .25 valve pin sliding right through it. Have a good one. Stoti

Scoti

Do you have the power plenum installed ?

Search

Search

Impact Power Plenum .35 caliber

GQ

Member

FX-USA

Member

stoti

Member

Broken_WV_Guy

Member

GQ

Member