I made all the required mods to fx Impact pic heavy

Forums PCP Airguns I made all the required mods to fx Impact pic heavy

  • Views : 1357
  • Link

    mubhaur
    Participant
    Member

    With 600mm barrel at 125 bar  reg I achieve 940 fps with 34 grain .25 pellets. 

    Link

    leadfoot
    Participant
    Member

    Very Nice! Thanks for the pictures.

    Link

    edosan
    Participant
    Member

    good job! 

    Link

    harrymoreland
    Participant
    Member

    Indeed some good workmanship,

    One question if I may, How many shots per fill?.

    opps three ?, is that also a home made gun stand?, and, is that a car jack?, I may copy that.

    many thanks.

    Link

    Airgun-hobbyist
    Participant
    Member

    Those are some nicely machined parts!  Did you make them yourself?

    Link

    mubhaur
    Participant
    Member

    Airgun-hobbyist

    Those are some nicely machined parts!  Did you make them yourself?

    I don't machine myself but my machinist does it for me.

    No doubt he is a good machinist.

    Regards, 

    Umair Bhaur 

    Link

    Glem.Chally
    Participant
    Member

    Great numbers for 125bar wow.  Nice work Umair!

    Link

    zx10wall
    Participant
    Member

    Very nice work!

    Link

    mubhaur
    Participant
    Member

    Thanks to all for the appreciation 

     

    Regards, 

     

    Umair Bhaur 

    Link

    Centercut
    Participant
    Member

    Very nice job, looks like high quality work.  Impressive!

    Link

    reprobate
    Participant
    Member

    well done sir

    Link

    Vana2
    Participant
    Member

    Excellent work – thanks for sharing!

    Link

    sniperlabyo
    Participant
    Member

    try M14 threads on the right has better performance compared to the 1/8 28 on the left 

    Link

    tibor
    Participant
    Member

    nice parts

    Link

    wajie316
    Participant
    Member

    Great work. Can't wait to get my impact .22 upgraded from you umair

    Link

    mubhaur
    Participant
    Member

    reprobate

    well done sir

    Thank you 

    Link

    mubhaur
    Participant
    Member

    wajie316

    Great work. Can't wait to get my impact .22 upgraded from you umair

    Sure why not

    Link

    concentrado
    Participant
    Member

    Very Nice! Thanks for the pictures.

    Link

    mubhaur
    Participant
    Member

    sniperlabyo

    try M14 threads on the right has better performance compared to the 1/8 28 on the left 

    Dear Ernest,

    In my experience M14 offers more air flow that is not always required . Unless I have to use heavy slugs, I dont need M14.  Use of M14 for average weight pellets sometimes becomes counter productive for extreme accuracy.

    You see that in my design, the cap of the plenum is on the male side threads, so I can make one more cap of M14 if needed in any future time.

    Too low reg pressure some times compromises accuracy in my tests.

    Regards,

     

    Umair Bhaur

    Link

    heavy-impact
    Participant
    Member

    I like your tube design. This saves a lot of time over machining solid bar.

Viewing 20 posts - 1 through 20 (of 20 total)

You must be logged in to reply to this topic.