Have one of the original huntmaster ar6 air rifles, need to know if anyone can lend advice on degassing, cant find anything, was going to loosen pressure gauge, any ideas other than that?
Thank you
Thank you
How to degas AR6 huntmaster rifle
- Thread starter bthurman
- Start date
That’s how to do it . Once below 100 bar , push on the hammer and the rest of the air will come out .
Upvote 0
Is it threaded I cannot find a diagram that shows the gauge as threaded or a part call out that says its threaded, Just dont want it flying off.
Upvote 0
It’s threaded, just like any other gauge. There’s a white delrin disc in the hole that seals it . Make sure you don’t lose it . It takes about half a turn before you hear any air come out .
I believe Bagnal and Kirkwood have a parts diagram . It’s a UK based retailer.
I believe Bagnal and Kirkwood have a parts diagram . It’s a UK based retailer.
Upvote 0
Thank you Sir, much appreciated and I will head out to check there diagrams. Its old and needs help but worth a restoration.
Upvote 0