How complicated is an FX Dreamline?

Jump to latest Follow Reply
GunshipGuy

GunshipGuy

Member
Mar 27, 2020
416
101
Collierville, TN, United States
I'm a guy who gets lost when things get very technical. I currently enjoy shooting multiple firearms, a little Benjamin Disco, an HW30s and HW50s, etc. I'd like to move to a more accurate PCP rifle for bench, pests and small game. After sorting through a gaggle of info, I've tentatively landed on the FX Dreamline series. I like the fact that it's light, accurate, quiet (with the moderator), etc. 

My concern is that I'd likely have a hard time if I need to get into the rifle to change O-rings, etc--anything beyond very basic maintenance and external adjustments. Plus, I know I'd need to add a tank to replace my pump. Finally, there is no one locally that I know of who does airgun tuning and service.

So, could I be biting off more than I can chew by buying a Dreamline? Is there a similar PCP in this price range that you'd suggest? Would I be happier to just stay with what I have? Thanks in advance for your thoughts.
 
The FX Dreamline is a great introduction into the PCP world. But there’s other great rifles within the same price range like the Brocock Sniper and a couple others. If you do decide on a Dreamline there’s a few adjustments you can make but the rifles are typically adjusted from FX ready to shoot. The adjustments are there if you are trying to fine tune the rifle for a specific pellet. I’d suggest picking the rifle up from a reputable dealer like Utah Airguns, SPAWeapons, Pyramyd Air, Baker Airguns, Airgun Depot, etc so if you have any questions or concerns they will take care of you. As well FX USA has been great when it comes to communication etc. There’s also plenty of posts on the Dreamline here and YouTube videos on the Dreamline. 
 
Upvote 0
I'm a guy who gets lost when things get very technical. I currently enjoy shooting multiple firearms, a little Benjamin Disco, an HW30s and HW50s, etc. I'd like to move to a more accurate PCP rifle for bench, pests and small game. After sorting through a gaggle of info, I've tentatively landed on the FX Dreamline series. I like the fact that it's light, accurate, quiet (with the moderator), etc. 

My concern is that I'd likely have a hard time if I need to get into the rifle to change O-rings, etc--anything beyond very basic maintenance and external adjustments. Plus, I know I'd need to add a tank to replace my pump. Finally, there is no one locally that I know of who does airgun tuning and service.

So, could I be biting off more than I can chew by buying a Dreamline? Is there a similar PCP in this price range that you'd suggest? Would I be happier to just stay with what I have? Thanks in advance for your thoughts.
Click to expand...

Good Evening GunshipGuy,

I just wanted to let you know if you have any issues with maintenance feel free to give our service line a call and one of our techs can walk through any technical issues you have. 

Also, feel free to DM us here with your personal information and we can give you a follow-up call if needed.

FX Airguns Customer Service team 
 
Upvote 0
I'm glad you brought this topic up: I have owned a variety of PCPs over the years. Frankly, taking one apart really makes me nervous. I'm scared I might lose a tiny part or mess something up. elh0102 mentioned the FX Royale 400. I have heard that those are pretty dependable and serviceable.

Yesterday, I was sitting at my friend's kitchen table when he tried to replace a part on a Bobcat (which I've been told has the same regulator and action as the Royale). He cycled the action several times to depressurize the air tube. We both did not know at the time that the valve stem usually comes out when the air is removed like that. So now he either has to send the Bobcat back to FX, or try to take the action apart further and attempt to reinsert the valve stem.

My point is if you've never done airgun repairs, it can pose problems if you don't know what you're doing. I shoot a Taipan Vet in .25. I'd like to put on one of Ernest's plenum extensions. But never have taken that gun apart prevents me from doing so.
Click to expand...


 
Upvote 0
get the dreamline open the box and shoot.it will shoot great as it is.i just got a 25 dreamline and it shoots great.40 shots at 903 fps for 40 shots...high is 912 fps low is 879 fps with the 25.39 jsb pellets.
Click to expand...

The DL is a lot less complicated than the Impact for sure. But Ohio Hunter is right. Just shoot the gun as it comes out of the box. These highly adjustable rifles are too tempting to start screwing around with all the settings to squeeze a few FPS from them.. Before you know it, you've got the thing all screwed up and go back to the factory settings, if you've remembered them. Don't listen to all the backyard mechanics here. Similar rifles with basic useable settings are the Daystate Regal and Air Arms S500/510. Good shooting, well made, and attractive rifles. just shoot and concentrate on your marksmanship.
 
Upvote 0
I thought it might be helpful to post a follow-up to my initial question. I was concerned about being able to maintain the FX Dreamline. I received the Dreamline Lite .22 about 2 months ago from Utah Air Guns. (BTW, I've been very happy with this vendor. Quick and excellent service.)

I think the best advice I received was to "shoot it as it comes out of the box." Thanks, Ohio_Hunter. That's exactly what I've done. When I've played with some of the external adjustments I've recorded what I did, and then dialed it back to the out-of-box settings. As a non-mechanical guy, that's worked well for me. I added a UTG 3-9x32 scope which I had on hand. I have a little 40 yard range set up in the backyard and have been able to shoot 1/2" groups at least half the time. I'm sure the rifle is capable of this consistently, but me--still getting used to it. I'm looking forward to going for some longer distances. 

All that said, I think I could have been equally happy with a Daystate Regal XL and saved a few bucks in along the way. Since I'm probably not going to do much tweaking, this would likely have served me well. And it's a rifle I've put on my wish list. BUT--no regrets. I'm having a great time with the Dreamline, as are my kids and grandkids. I think I'll enjoy it for many years to come.

So, a huge thank you to everyone for your help and encouragement! I'm an extremely "happy camper." 
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu