How accurate is your hatsan pcp?

Richard300 · Jan 3, 2016

Hello. I would like to see how accurate your hatsan pcp is.
Lets hear what model you have.
What cal it is.
The range your shooting at.
What pellet your using.
What conditions you were shooting in. outdoors or indoors.
What you did to make it so accurate.
last... where are you from.
This should be fun...and we might learn something along the way.

Pictures and videos are welcome.

Lets have fun with this. Thanks

1kshooter · Jan 3, 2016

try the search feature on here ...hit up you tube and watch some review as well!
I am sure that you will find most of the information you seek with a little bit of looking ...then if you are having a hard time finding something specific that is what someone here that has the gun may be able to shed some light on!
Jonathan

0akhonor · Jan 3, 2016

Galatian QE II.25- un reg'ed - stacks 5 JSB's into one hole, outdoors at 35 yards- When I have the POI dialed in...

Spent this last week on the chrono, playing with the hammer spring. Finished with this-150 bar gives 13 shots with a std of 10. The hammer tensioner "creeps". This was my first attempt to adjust it. I understood that the factory starts with it 1/2 turn out from stock. Mine was fully turned in- towards the lesser tension.
I stopped at one full turn out, and kept the pressure below 160 bar for the first shot.
The original settings were providing results around a std of 32- 35. Velocities started at 733 and climbed to 816 fps by the 31st shot. No curve, the plot line in excel looked like the sales figures for beer at the SuperBowl- straight up. left to right.
Energy was less than my FX .22 at the beginning, to 37.55 ft/lbs at the end of the string.

Now I start at 847 fps, and finish at 862. All shots are over 40 ft/lbs. I use this for ground squirrels- I have two cylinders, for 26 shots.
That's a good day, right there!

Richard300 · Jan 3, 2016

Thanks 1kshooter thanks for the info and oakhonor.Thanks for the great read. Sounds like you have it set up pretty good. I'm just starting in this hobby. I've got a hatsan AT44-10 QE long .25 on order, Regulator is on its way order, (I will have to figure that out)...strait shooter mixed pellet pack is ordered with some extra pellets to just brake in the barrel, Most of my parts are in for my carbon fiber tanks. I'm just waiting for everything to get here... : ) Once I get this one shooting I will get one in 22 and might build a bullpup out of it. Thinking of setting up 2 tanks one under the other but that is just in my mind for now. I,m not new to shooting sports ,,,I did a lot of archery, and powder guns. This is my next step.... : ) Shoulder put me out of the archery life, All the sales from my archery stuff is turning into pellet gun stuff...

Ammo prices got crazy... if you can find any. Then I found ted's holdover....opened my eyes. Now pellet guns are accurate...and I am into accuracy.. So this is my next step. Anyway thanks so far with all the input. Keep them coming. Richard

1kshooter · Jan 3, 2016

Richard, sounds like you are well on your way to a great set up! ...Welcome to the world of airgun!
What do you plan on doing with your air rifle? mostly hunting? species?
Jonathan

Richard300 · Jan 3, 2016

Hi shooter...I have been out of hunting for a few years the job I have is a lot of different hour and work most week ends. I retire in a little over a year then I will get back at it. Rabbit, squirrels, pests, and Big foot if I see one... : ) Maybe not big foot... I think i would just make him mad with a .25 and I can't outrun my buddy... : ) I like target shooting. Like i said I like accuracy. My son is setting up a range... today... at his home. But it isn't fun shooting in 18" of snow... : ) Got to love Wisconson... Made up a few field target but they may not hold up to these more powerful airguns. After I retire I want to go to the extreme bench rest shoot in AZ. Would be Way cool to do good there with a hatsan rifle. I'm sure we are thought as the underdog if were thought of at all... : ) I was saving up to get a FX wildcat... then saw on one of the form how well these hatsan pcp rifles shoot. I thought ...heck... I can set one up for me and get my wife one (that I can use ) with a different cal .22 and have less money then I would with one fx wildcat. But I sure love the fx rifles. I started at the end of this year ..doing a lot of kayak fishing my wife and I enjoy this also. I like tinkering and building things...but I am not fast at getting anything done... : ) I hope my stuff comes in soon I want to tack a few targets and get started. Looks like your a goose hunter... nice pic. Bet you didn't get them with a pellet gun...: ) Richard

1kshooter · Jan 4, 2016

Welcome back Richard, sounds like your going to have a lot of fun with your wife afield with the new toys!
I did not shoot the geese with an air rifle wish it was legal to do so here same goes for doves lol ...it would bring a lot more hunting opportunities my way!
I look forward to the posts and following your journey as well!
Jonathan

Richard300 · Jan 6, 2016

Well my set up is almost done...Just need a few things to get here. one fitting to complete the tank system....The regulator ... The bipod ....flip ups for my scope. Here is what I have so far...

Thanks for all the help...Richard

0akhonor · Jan 6, 2016

Hey Richard,
You are set! Can you get access to a chrony?
The guns are accurate, but it's great to know the power curve.
And don't trust the air gauge on the rifle- the bottle gauge rules!
Good luck!!

1kshooter · Jan 6, 2016

looks great! ...cant wait to see your pictures and follow your journey with you!
Jonathan

Richard300 · Jan 7, 2016

Im waiting on a fitting to finish the gages. Got a corny.....from my archery days...just waiting to finish..richard

HatsanHunter · Jan 13, 2016

Hello Richard, I have a similar tank system but my bleed valve doesn't work very good, where did you get yours?

As for my Hatsan, it is an AT44W-10 in .22, my best group was at 80 meters with JSB heavy @900 fps, little to no wind conditions, 5 shots, 3/4" CTC. I think that if I had an appropriate rest that group could have been slightly bigger than 1/2".

Richard300 · Jan 14, 2016

great accuracy... man that's a great group. Did you do any modifications on your at 44w? hope my gun will shoot that good. hatsan hunter I got my part to build and the bleed valve at North Shore compressor and machine. Thanks for showing me how well your gun and you shot.

HatsanHunter · Jan 14, 2016

That's what I call a lucky group, normally I do 1" groups at 80 meters. And yes I modified the valve to be more efficient and at longer range I only use the most consistent shots (inside 10fps ES), it is actually very easy to mod the valve you just need a chronograph and some 6-32 set screws.

blackdiesel · Jan 14, 2016

Baxter has lots of examples on his youtube site. Here are some groups shot in windy conditions

Richard300 · Jan 14, 2016

Blackdiesel.....thats great group ...what are u shooting.
any modifications on your gun?

hatsan hunter... a 1 in group at 80 yards isnt luck....if u do that a lot.... : )

Todd_Bobcat · Jan 14, 2016

Your on your way Richard. Welcome to the world of PCPs. Nothing like them. Youll soon be looking for your next one.

Richard300 · Jan 14, 2016

Hey tod hows the tx shooting. Already looking for one for my wife. I trying to decide what i should get? Get a shoebox or a rifle for my wife.. All my archery stuff is turning into air rifle stuff...: ) I will have to sale off some of my rc stuff to finish off what I need. Or work harder.... : )

Richard300 · Jan 14, 2016

Got the bypod on...flip up on the front of the scope....camera mount...casio camera...used but works good....all the parts.for the fill guage....got the regulator ...not in yet....so im ready except for the weather out side....running around 0 deg not counting wind chill. Got to lov WI.... : )

Turboken77 · Jan 20, 2016

I have the 30 cal carnivore first time out got it set at 50 yards 1/2 inch groups then was shooting 3inch spinner at 100yards at will

How accurate is your hatsan pcp?

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member