In this video, I show you how to make heavy duty sustainable spinning targets that will not break the bank. The one thing I did not show in the video is that you must drill out the 1/4" hole at the top of the A1011 steel target from 1/4" to 17/64 or .2656. If you do not enlarge the hole they will not spin nice on the 1/4" rod as they fit too tight.
Below is a list of things needed:
The steel dude on eBay is awesome! His name is Keith and he can make you anything from steel, he is fast and his prices are reasonable.
I bought 40 targets for 40 bucks 1/8" A1011 Steel plate. He will make whatever you want and will quote you before anything starts.
Here is his contact info on eBay.
https://www.ebay.com/usr/lumberjack1983
Tell him Hajimoto sent ya!
I hope this video offers you some value
https://www.youtube.com/watch?v=GpUYB-1CImU
https://www.youtube.com/watch?v=GpUYB-1CImU
Below is a list of things needed:
- 1/4" steel rod (Home Depot)
- 1/4" ID Vinyl Tubing (Home Depot)
- 1/8" A1011 Steel Targets (See below)
- 1/4" x 3" lags (Home Depot)
- 1/4" Flat Washers (Home Depot)
- 1/4" Lock Washers (Home Depot)
- Black Paint (Home Depot)
- White Paint (Home Depot)
- Bench Vise
- Hammer
- Large Adjustable wrench
The steel dude on eBay is awesome! His name is Keith and he can make you anything from steel, he is fast and his prices are reasonable.
I bought 40 targets for 40 bucks 1/8" A1011 Steel plate. He will make whatever you want and will quote you before anything starts.
Here is his contact info on eBay.
https://www.ebay.com/usr/lumberjack1983
Tell him Hajimoto sent ya!
I hope this video offers you some value
https://www.youtube.com/watch?v=GpUYB-1CImU
https://www.youtube.com/watch?v=GpUYB-1CImU
