Yo!!!
I cannot find a specifically related topic, so here it is;
My impact has to be sent back, as the trigger sear is somehow locked up and won't release the hammer, so I've picked up the Sumatra for a revisit. Of course I've had luck with the Hunter Supply 48 grain hollow points, but I have 100 lbs of wheel weights that I used to make sinkers with, and I need to save some money, as I shoot a lot! I found the NOE 250-50-FN-BT-BB3. As the profile suggests, it's a 50 grain boat tail slug. The nose is .250, the rear drive band is .252. I have the newer approx .251 barrel Sumatra, and I feel like this would hit about 930 fps or so a few clicks down from full power, which is normally prime velocity for slugs. Has anyone tried this mold, for Sumatra, or any other airguns for that matter?
Thanks ahead of time..... Chris
I cannot find a specifically related topic, so here it is;
My impact has to be sent back, as the trigger sear is somehow locked up and won't release the hammer, so I've picked up the Sumatra for a revisit. Of course I've had luck with the Hunter Supply 48 grain hollow points, but I have 100 lbs of wheel weights that I used to make sinkers with, and I need to save some money, as I shoot a lot! I found the NOE 250-50-FN-BT-BB3. As the profile suggests, it's a 50 grain boat tail slug. The nose is .250, the rear drive band is .252. I have the newer approx .251 barrel Sumatra, and I feel like this would hit about 930 fps or so a few clicks down from full power, which is normally prime velocity for slugs. Has anyone tried this mold, for Sumatra, or any other airguns for that matter?
Thanks ahead of time..... Chris
