Help disassembling a airforce condor ss

Jump to latest Follow Reply
crittahitta

crittahitta

Member
Mar 10, 2017
1,645
101
Long Island NY, United States
I was trying to take apart my condor ss and had problems. I took all the grub screws and the end cap at the muzzle. I removed the bafles but could not remove the barrel. I put it all back together. I would also like to know how to remove the hammer and spring so i can replace it in the near future. Any help would be greatly appreciated. I couldnt find anything on youtube either. There was some stuff on the condor but it is a different gun due to the sound suppression baffles and barrel being recessed in the tube. Thanks.
 
Thanks davecole. I forgot to look over there at TAG. I will see if someone knows of a video too. Im a little nervous taking it apart or forcing something and breaking it. I thought taking all the grub screws out and the barrel would slide out easily. Either im missing something or it is seized up. It is really dirty inside the tube and the baffles are covered in powdered lead. Thanks again, i will save those links.
 
Upvote 0
There are two screws under the fore stock be sure to remove the power wheel indicator screw.

If you are sure all of the screws are removed you should be able to gently push the barrel from the leade. Be very careful striking the leade with anything other than a soft material.

if I remember correctly, it’s been awhile since I had one apart, the gun has to be cocked in order for the hammer assembly to be removed.

if you get to a point where you’re just stumped let me know and I’ll try to bail you out.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu