Hatsan Trigger Problem.

Forums PCP Airguns Hatsan Trigger Problem.

  • Views : 477
  • Link

    JDShapp
    Participant
    Member

    Tonight I had the unfortunate problem of this spring in the photo of coming loose. I’m guessing when I stripped the rifle down I lost 2 clips to hold this spring in place more securely. Anyone have an idea of what kind of clip and its size that goes on those pins or could go on them to keep it in place?

    http://

    Link

    spysir
    Participant
    Member

     “E-clip” , grab a mixed size pack of about 30 of them from O-Rielly’s or NAPA auto ( or similar). Should have a couple of the correct size in there and cost $1.00 for the whole pack.

    John

    Link

    BigTinBoat
    Participant
    Member

    “JDShapp”Tonight I had the unfortunate problem of this spring in the photo of coming loose. I’m guessing when I stripped the rifle down I lost 2 clips to hold this spring in place more securely. Anyone have an idea of what kind of clip and its size that goes on those pins or could go on them to keep it in place?

    http://

    
I think you only lost 1 clip. An e-clip goes on the post where the spring ends. On the post that is in the middle the spring itself actually goes into the groove on the post. No clip there. At least there is not one on my gun, or in the below pic (if it shows up)
    http://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=103996.0;attach=149684;image

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.