Hatsan Flash cleaning

Forums Other Parts, Accessories, & Equipment Hatsan Flash cleaning

  • Views : 434
  • Link

    Jon86
    Participant
    Member

    Hi has anyone cleaned a barrel on the Hatsan Flash .22? If so what steps were used . Also anyone modded with a regulator or hammer spring? If so what brand of reg ?

    Link

    Jking_sley
    Participant
    Member

    Actually just got done cleaning mine about an hour ago! Patchworm(w .22 green insert), ballistol, homeade patches(old cut up t-shirt), and a straw to work past the moderator. Insert straw into moderator end until it lines up with the barrel, be careful not to push too far as the straw can potentially go all the way through. Now insert patchworm and pull through alternating patches w ballistol and plain dry until they come through clean with no lead residue. Then just pull through dry patches until no residue remains from the ballistol. Btw mines a .22 shooting h&n barr 21.14's for 20 good shots with a donnyfl sumo being the only modification.

    Link

    Jon86
    Participant
    Member

    Cool, thanks for the great info .I've already put @ least 1k rounds through it , think it's time for a cleaning. 

    Thanks

    Jon86

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.